Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives you a low-profile pull that mounts at the edge of doors or drawers, keeping fronts visually clean while still easy to open in daily use. The 2 inch center to center dimension sets precise hole spacing, which matters when laying out multiple pulls on a run of cabinets or drawer banks. The 3 inch overall length provides enough gripping area at the edge, supporting a comfortable pull point on smaller doors or drawers. A 1-9/16 inch projection sets how far the pull stands off the surface, affecting finger clearance and how the piece feels when operated. The anodized brushed brass finish defines the final look, tying into other brass hardware and finishes across the project for a coordinated appearance. The EPCO part number DP41-BBR-3 links this exact combination of size, style, and finish for repeat orders and matching replacements.
The back mounted design of this EPCO Edge Series tab pull means it attaches from the rear of the door or drawer front, which keeps visible surfaces free of fastener heads in finished installations. The pull is designed for material thickness of 1/2 inch to 7/8 inch, defining where it can be used on cabinet components and helping you match it to typical panel stock. A 2 inch center to center distance controls the separation of the mounting points, which is useful when transferring measurements to jigs or templates. The 3 inch overall length and 1-9/16 inch projection work together to define ergonomics at the edge, affecting how fingers catch the pull when opening.
This EPCO Edge Series tab pull is positioned for use on cabinet doors and drawers where a back mounted, edge-style pull is preferred. The 3 inch overall length keeps the pull compact, which suits smaller cabinet fronts and modern frameless layouts. With a 2 inch center to center spacing, it follows a common small-pull layout that can be repeated across kitchen, bath, or shop cabinetry using consistent drilling setups. Designed for material thickness between 1/2 inch and 7/8 inch, it fits typical cabinet door and drawer front constructions, supporting use with many standard panel builds. The 1-9/16 inch projection from the face defines how much pull surface stands proud, helping the pull stay easy to grab while following a streamlined look on the cabinet line.
The defined 2 inch center to center dimension on the DP41-BBR-3 tab pull supports repeatable drilling and jig use, which helps reduce layout time and rework on multi-piece cabinet jobs. The 3 inch overall length offers a consistent edge footprint, allowing you to maintain equal margins and spacing relative to panel edges. The specified material range of 1/2 inch to 7/8 inch clarifies where the pull is intended to seat, so the tab sits correctly at the door or drawer edge without overhanging excessively. A 1-9/16 inch projection sets an exact stand-off that remains consistent from unit to unit, which supports uniform feel across a full installation. The anodized brushed brass finish gives the surface its brass color and brushed appearance, allowing the pull to visually match other brushed brass decorative hardware throughout the project. Using the EPCO manufacturer part number DP41-BBR-3 connects these dimensions and finish in a single identifier, which supports consistent reordering for future phases or matching replacements. The description as part of EPCO decorative hardware and moldings, handles and pulls, anchors this piece within a broader family, which can help align it with other EPCO components on the same job.
This EPCO Edge Series tab pull uses a 2 inch center to center dimension, which sets the exact spacing for drilling or boring the two mounting holes during cabinet fabrication.
The DP41-BBR-3 tab pull has a 3 inch overall length and a 1-9/16 inch projection, which together determine the footprint on the edge and the clearance for fingers to grasp the pull.
This brushed brass edge pull is designed for material thickness between 1/2 inch and 7/8 inch, aligning with common cabinet door and drawer front stock used in many woodworking applications.
The back mounted design fastens from the rear of the panel, leaving the front cabinet face without visible fastener heads and supporting a clean, modern presentation on doors and drawers.
The EPCO DP41-BBR-3 edge pull has an anodized brushed brass finish, which establishes its brass color tone and brushed surface character for coordinating with other brass hardware.
The EPCO part number DP41-BBR-3 ties together the Edge Series style, 2 inch center to center size, and anodized brushed brass finish, simplifying ordering and matching across multiple projects.
The EPCO Edge Series tab pull with 2 inch center to center and 3 inch overall length offers a known layout for cabinet projects. Its 1-9/16 inch projection and design for 1/2 to 7/8 inch material give clear fit parameters, while the anodized brushed brass finish sets the visual direction. Choosing the DP41-BBR-3 designation ties those specifics to one pull, supporting consistent results whenever you repeat this hardware choice on jobs.
Sold In: 1 Each