Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives you a low-profile way to open doors and drawers while keeping fronts clean. This anodized brushed brass tab pull is back mounted, so it fastens from the rear and leaves only the slim pull visible on the face. The 2 inch center to center mounting spreads load across two fasteners, helping the pull feel solid in regular cabinet use. Its 4 inch overall length gives enough grip area for fingers while keeping the hardware discreet on smaller doors and drawers. A 1-9/16 inch projection provides usable clearance for fingers to pull, supporting comfortable operation on frequently used fronts. The pull is designed for material thickness of 1/2 inch to 7/8 inch, matching common cabinet door and drawer front construction so it can be used across a typical run of casework.
The EPCO DP41-BBR-4 tab pull is back mounted, so mounting holes are drilled through the cabinet door or drawer front and the pull is secured from the rear. The 2 inch center to center spacing defines the exact distance between these holes, which supports accurate drilling with shop-built or commercial templates. Because it is designed for material thickness from 1/2 inch to 7/8 inch, it works with many standard panel thicknesses used in residential and commercial cabinetry. The 4 inch overall length and 1-9/16 inch projection define the working envelope of the pull on the edge, which helps in planning hardware clearance near adjacent doors, walls, and appliance panels.
This EPCO Edge Series tab pull is an anodized brushed brass handle in the handles and pulls class, so it suits decorative cabinet hardware layouts where a slim brass visual is desired. Its 2 inch center to center layout and 4 inch overall length work well on smaller to mid-size doors and drawers commonly found in kitchens, baths, and built-ins. Because the pull is back mounted and sized for 1/2 inch to 7/8 inch material, it fits typical cabinet doors and drawer fronts without changing standard construction thicknesses. The 1-9/16 inch projection defines how far the pull extends from the edge, allowing layouts that respect clearances between neighboring fronts and end panels in tight installations.
The defined 2 inch center to center spacing on the EPCO DP41-BBR-4 tab pull lets installers standardize drilling patterns across banks of doors and drawers, which supports faster production and consistent alignment. The 4 inch overall length gives a predictable visual proportion from unit to unit, helping maintain straight sightlines along runs of cabinetry. With its back mounted configuration, the pull relies on through-holes in the 1/2 inch to 7/8 inch thick material, so the fastening point is anchored in the full panel thickness for a solid feel. The anodized brushed brass finish means the brushed brass look is part of an anodized surface, which supports a uniform appearance across multiple pulls in the same project. The 1-9/16 inch projection sets a fixed standoff from the edge, helping avoid finger pinch points when doors and drawers are adjacent.
The EPCO Edge Series tab pull has a 2 inch center to center dimension, giving a fixed drilling layout that keeps pulls aligned across multiple cabinet fronts.
The EPCO DP41-BBR-4 tab pull has a 4 inch overall length, providing enough grip area while staying compact for smaller cabinet doors and drawers.
The tab pull has a 1-9/16 inch projection, creating space for fingers to pull without extending excessively from the cabinet edge.
The EPCO edge pull is back mounted, fastening from the rear of the door or drawer front so the front face shows only the pull body.
This pull is designed for material thickness of 1/2 inch to 7/8 inch, matching common cabinet door and drawer front constructions.
The EPCO Edge Series tab pull has an anodized brushed brass finish, giving a brushed brass appearance with an anodized surface treatment.
The EPCO Edge Series tab pull in anodized brushed brass pairs a 2 inch center to center layout with a 4 inch overall length to address compact cabinet fronts. Its back mounted design, 1-9/16 inch projection, and fit for 1/2 inch to 7/8 inch material support consistent installations across typical doors and drawers. For projects calling for a slim, brushed brass pull with defined drilling dimensions, this DP41-BBR-4 model offers clear measurements for layout and mounting.
Sold In: 1 Each