Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull is a compact handle designed to give doors or drawers a low-profile gripping point while keeping front faces clear. The 1 inch center to center sizing aligns with small cabinet layouts, so pulls sit consistently across narrow fronts. Its 1-1/2 inch overall length keeps the tab discreet at the edge, which supports tight reveals and modern lines. A 1-9/16 inch projection provides enough finger clearance to grab the pull comfortably without crowding adjacent fronts. The anodized brushed bronze finish adds a bronze tone with an anodized surface, which supports a consistent look across multiple pulls. Back mounted construction puts fasteners through the rear of the panel, leaving only the tab visible on the working face. EPCO branding and DP41-BBZ part identification tie this pull to a defined series, which simplifies reordering for future runs or replacements.
This EPCO Edge Series tab pull uses back mounted installation, so it fastens from the rear of the door or drawer into the pull body. The 1 inch center to center dimension defines the drilling pattern, helping position holes accurately when laying out hardware. With an overall length of 1-1/2 inches, the pull fits well on slim fronts where edge space is limited. The 1-9/16 inch projection sets the working standoff, providing clearance for gripping without extending excessively into walkways. It is designed for material thickness of 1/2 inch to 7/8 inch, so it works within that range on cabinet doors or drawer fronts. The anodized brushed bronze finish and EPCO Edge Series identity support using this pull where a consistent brushed bronze appearance is part of the job requirement.
The EPCO Edge Series tab pull with 1 inch center to center spacing fits on cabinet doors or drawers that can accept a compact hole pattern near the edge. Its 1-1/2 inch overall length suits installations where only a small portion of the pull is exposed along the front, such as at the top of slab doors or drawer fronts. The 1-9/16 inch projection defines a usable grip without dominating the face, which works well on modern cabinets emphasizing clean planes. Designed for material thickness of 1/2 inch to 7/8 inch, this pull is suited to common cabinet door and drawer stock within that range. The anodized brushed bronze finish supports projects calling for a brushed bronze tone, tying in with other similarly finished components in the same space. With EPCO as the brand and DP41-BBZ as the identifier, this pull belongs to a defined Edge Series family, which helps maintain uniform appearance on larger runs of cabinets.
The 1 inch center to center tab pull dimension gives a fixed reference for drilling jigs, which helps set up repeatable hole spacing across multiple cabinet fronts. Its 1-1/2 inch overall length keeps the visible metal limited to a small area at the edge, so door and drawer faces remain the dominant visual element even when many pulls are installed. A 1-9/16 inch projection defines the working clearance from the surface, which can be accounted for when planning door swing clearances or drawer spacing. The pull is designed for material thickness of 1/2 inch to 7/8 inch, so that range can be used as a planning factor when selecting door or drawer stock. Anodized brushed bronze as the finish provides a consistent color and surface character, supporting visual continuity when the same pull is used throughout a project. The DP41-BBZ manufacturer part number and SAP description ALUM EDGE PULL W/SCRWS,1.5INL,1IN CC,BBZ identify the exact configuration, which aids in specifying, ordering, and matching replacements long term.
The EPCO Edge Series tab pull has a 1 inch center to center hole spacing, 1-1/2 inch overall length, and 1-9/16 inch projection, which define drilling layout and working clearance on cabinet fronts.
The back mounted design uses fasteners from the rear side into the pull, leaving only the tab visible on the front, which keeps cabinet faces clear of exposed mounting points.
This EPCO tab pull is designed for material thickness of 1/2 inch to 7/8 inch, aligning with common cabinet door and drawer front stock within that range.
The DP41-BBZ tab pull has an anodized brushed bronze finish, giving a brushed bronze appearance with an anodized surface suited to matching similar bronze components.
The 1 inch center to center spacing provides a compact, repeatable drilling pattern, which simplifies jig setup and keeps hardware aligned on narrow cabinet fronts.
The DP41-BBZ part number uniquely identifies this anodized brushed bronze Edge Series pull, helping maintain consistency when ordering for large runs or future replacements.
The EPCO Edge Series tab pull, DP41-BBZ, combines a 1 inch center to center layout, 1-1/2 inch overall length, and 1-9/16 inch projection to support compact, repeatable cabinet hardware runs. Its anodized brushed bronze finish and design for 1/2 inch to 7/8 inch material thickness align well with common cabinet doors and drawers. For projects requiring a consistent brushed bronze look with a discreet, back mounted gripping point, this tab pull provides defined dimensions and a clearly identified part number for straightforward specifying and reordering.
Sold In: 1 Each