EPCO Edge Series Tab Pull For Clean Fronts

EPCO Edge Series tab pull gives you a low-profile way to open doors and drawers while keeping cabinet faces clear. This anodized satin black tab pull mounts at the edge, so it provides a grip point without needing a traditional handle on the face.

The 2 inch center to center layout matches common small-door and drawer layouts, which helps when lining this pull up with existing boring patterns in a shop workflow. Its 3 inch overall length provides enough finger contact for a solid pull while still fitting on compact fronts.

The 1-9/16 inch projection brings the pull out far enough from the edge to grab easily, which is helpful for quick access on frequently used doors. This pull is back mounted, so it fastens through the cabinet material from behind, leaving the front side uninterrupted and visually clean.

The anodized satin black finish gives the aluminum pull a consistent dark tone, supporting jobs that need modern black decorative hardware and a uniform look across multiple fronts.

Key EPCO Edge Pull Details That Support Work

• The 2 inch center to center dimension lets you drill a repeatable hole pattern across doors and drawers, which speeds production and keeps handle alignment consistent on cabinet runs.
• The 3 inch overall length keeps the pull compact at door edges, which helps when working on narrow face frames or tight drawer banks where space for decorative hardware is limited.
• The 1-9/16 inch projection sets a clear stand-off from the edge, providing room for fingers to grab the pull comfortably and helping avoid knuckle contact with adjacent fronts.
• The back mounted design uses holes from the rear of the door or drawer, which keeps the visible surface clear of fasteners and supports a clean, contemporary hardware layout.
• The anodized satin black finish on the aluminum body establishes a uniform black look that coordinates with other black decorative hardware on the same project.
• The fit for 1/2 inch to 7/8 inch material thickness means this pull works across common cabinet door and drawer stock ranges used in many woodworking shops.

Edge Pull Mounting And Fit For Cabinet Jobs

This EPCO Edge Series tab pull is designed as a back mounted component, so it fastens from the rear of the door or drawer into the pull. That approach keeps the front of the edge pull free of visible fasteners, which supports a streamlined appearance on finished cabinets.

The pull is sized for material thickness from 1/2 inch to 7/8 inch, covering common door and drawer front stock used in cabinetry. That range helps keep one pull type usable across multiple box lines on a job.

The 2 inch center to center spacing defines where the mounting holes sit along the edge, giving a clear drilling reference when setting up jigs or CNC programs for repeat cabinet runs.

Using This Satin Black Edge Pull In Practice

Where This EPCO Edge Series Tab Pull Fits

This EPCO Edge Series 2 inch center to center anodized satin black tab pull fits at the edge of cabinet doors and drawers where a discreet grip point is preferred. Its 3 inch overall length allows it to sit near the top or side edge of smaller doors without overwhelming the panel. On drawer fronts, the projection of 1-9/16 inch sets the pull out far enough for a comfortable grip while still staying tight to the cabinet face for a minimalist profile.

The pull is specified for material thickness from 1/2 inch to 7/8 inch, so it works across typical cabinet constructions from thinner doors up through thicker fronts. In a shop that runs multiple lines, this range lets the same pull pattern serve different box styles while keeping hardware appearance consistent. On face frame or frameless cabinets, the back mounted design secures through the front material into the pull, supporting a similar install approach across cabinet types.

Details That Help Repeatable Mounting And Layout

The 2 inch center to center dimension on this DP41-BL-3 tab pull gives an exact distance between mounting holes, which is useful when setting up drilling jigs or CNC programs for production work. Having a precise and compact spacing helps when pulls must be placed near edges or in tight banks of drawers. The 3 inch overall length works with that spacing to keep the pull balanced along the edge, which contributes to a clean visual line when multiple pulls are installed in a row.

The 1-9/16 inch projection affects how far fingers reach toward the cabinet face, so it provides enough clearance for a comfortable grip even on slightly recessed doors. Because the pull is back mounted, the screw bores run through the door or drawer from the rear, which keeps the working face clear and contributes to a simple cleaning surface in use. The anodized satin black finish supports projects using black decorative hardware throughout a room, keeping the edge pulls visually tied in with other black handles and knobs.

Common Questions About This EPCO Edge Pull

Select This Tab Pull For Edge-Mounted Black Hardware

The EPCO Edge Series tab pull with 2 inch center to center and 3 inch overall length offers a compact, back mounted option for cabinet doors and drawers. Its anodized satin black finish and 1-9/16 inch projection provide a clean look and usable grip on common material thicknesses from 1/2 inch to 7/8 inch. For projects that call for edge-mounted black decorative hardware across multiple box styles, this DP41-BL-3 tab pull supports a consistent layout from piece to piece.