Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives a low-profile way to open cabinet doors and drawers while keeping faces clean and flat. The 2 inch center to center drilling focuses the grip in a compact area, which helps on narrow fronts or smaller drawer widths. The 4 inch overall length provides extra finger room while still keeping the pull discreet along the door or drawer edge. The anodized satin black finish creates a uniform dark surface, which suits modern projects where visible hardware needs to visually recede. Aluminum construction keeps the pull light, which reduces load on small doors and drawer fronts during repeated use. The tab pull design fits along the panel edge so nothing stands proud on the face, useful when aligning with adjacent panels or integrated appliances. The EPCO brand and DP41-BL-4 part number give a consistent reference when matching pulls across multiple rooms or phases.
The back mounted layout means this tab pull fastens through the cabinet door or drawer from the rear, so drilling is done from the inside face toward the edge line. The 2 inch center to center dimension sets the exact hole spacing, which simplifies layout when repeating the same measurement across a run of doors. The 1-9/16 inch projection defines how far the gripping edge extends past the cabinet face once mounted, guiding positioning when hardware must clear adjacent walls or appliances. The thickness range of 1/2 inch to 7/8 inch tells where the bending point of the pull aligns with the panel edge, so the installer can select doors and fronts within that band for a snug fit. The DP41-BL-4 identifier ties these installation traits to a single part reference during planning and field work.
This 4 inch aluminum edge pull works on cabinet doors and drawer fronts that fall within the 1/2 inch to 7/8 inch material thickness range, which covers many frameless and face-frame kitchen, bath, and storage applications. The 2 inch center to center drilling makes it suited to smaller drawer boxes or narrow doors where longer pulls would crowd nearby edges or conflict with other hardware. The back mounted configuration suits interiors where access to the inside face is available, such as typical cabinet carcasses, allowing straightforward drilling and fastening from within the box. The anodized satin black finish coordinates with dark hinges or other black decorative hardware elements, letting the pull integrate into a unified project palette. The 1-9/16 inch projection provides enough grip depth for fingers even when mounted on thicker fronts within the specified range.
The fixed 2 inch center to center spacing on the EPCO Edge Series tab pull helps keep drilling patterns consistent, which is important when multiple installers are working from the same layout on a jobsite. The clearly defined 4 inch overall length simplifies planning when aligning pulls in straight visual lines across banks of drawers, since each pull occupies the same length along the edge. The specified projection of 1-9/16 inch gives a known stand-off from the door or drawer face, helping designers and installers plan clearances in tight corridors or near tall cabinet runs. The material thickness range of 1/2 inch to 7/8 inch indicates where the bend of the pull will land relative to the panel edge, supporting a repeatable look as doors of different constructions are used within that band. The anodized satin black finish on aluminum offers a consistent appearance across pieces marked as DP41-BL-4, supporting coordinated results when phases of a project are ordered at different times.
The DP41-BL-4 is an EPCO Edge Series anodized satin black aluminum tab pull, so it mounts at the edge of doors or drawers for a low-profile way to open cabinets.
This EPCO Edge Series tab pull uses a 2 inch center to center drilling, which standardizes hole spacing across doors and drawers using this model.
The EPCO Edge Series tab pull has a 4 inch overall length, giving extra grip area while keeping the hardware compact along the cabinet edge.
The DP41-BL-4 pull has a 1-9/16 inch projection, setting finger clearance and how far the pull stands off the cabinet face.
This tab pull is designed for material thickness from 1/2 inch to 7/8 inch, so the bend and grip land correctly along the door or drawer edge in that range.
This EPCO tab pull is back mounted, so it fastens from the inside face of the door or drawer, leaving the exterior surface free of visible screw heads.
The EPCO Edge Series tab pull with 2 inch center to center spacing and 4 inch overall length suits projects needing compact, edge-mounted hardware with predictable drilling. The anodized satin black aluminum finish supports modern cabinet designs where darker hardware is preferred. The 1-9/16 inch projection and back mounted style establish known clearances and a clean exterior look on doors and drawers. The design for material thickness from 1/2 inch to 7/8 inch lets one pull type serve a wide range of common cabinet constructions. Using the DP41-BL-4 identifier links specification, ordering, and installation around a single, consistent part.
Sold In: 1 Each