Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives you a compact anodized satin bronze pull that creates a low-profile grip along the cabinet edge, which helps when the project calls for a modern look without bulky handles. The 2 inch (51 mm) center to center drilling concentrates the grip point in a tight space, which simplifies layout on smaller doors or drawer fronts. An overall length of 4 inches extends the pull past the drilling pattern, which gives fingers a clear place to grab while keeping the hardware visually light. The 1-9/16 inch projection sets the pull out from the front, which provides enough clearance for a comfortable grip in day-to-day use. The anodized satin bronze finish treats the aluminum surface, which supports a consistent color tone across multiple pulls on the same run of cabinets.
The EPCO Edge Series tab pull uses a back mounted layout, which means the fasteners draw the pull tight from the inside of the door or drawer front and keep the outside face free of visible mounting heads. The pull is specified for material thickness of 1/2 to 7/8 inch, which defines the range of door and drawer front thicknesses where the grip sits properly around the edge. The 2 inch center to center dimension establishes the drilling pattern, which streamlines marking and boring operations when repeating the same layout across a cabinet run. The 1-9/16 inch projection determines how far the grip extends from the front, which matters when planning clearance to adjacent doors, walls, or appliance panels in tight installations.
The 4 inch overall length of this EPCO Edge Series tab pull makes it suited to smaller and mid-size cabinet doors or drawer fronts where hardware scale needs to stay compact, which helps keep fronts looking balanced on face frames or frameless boxes. The pull is back mounted for material thickness of 1/2 to 7/8 inch, which aligns with common cabinet door and drawer front stock in many shop-built and manufactured lines. The 2 inch center to center drilling on the DP41-BZ-4 tab pull matches a short drilling spread, which is useful when rails are narrow and do not have room for wider patterns. The anodized satin bronze finish lends a warm metallic tone, which supports projects where decorative hardware and moldings need to coordinate along the same color family.
The defined 2 inch center to center spacing on this back mounted edge pull lets installers use consistent drilling jigs, which reduces layout time and helps keep pulls aligned across multiple cabinets. The specified material thickness range of 1/2 to 7/8 inch gives a clear window for edge conditions, which helps the pull grip the edge properly without overhanging thin fronts or crowding thicker ones. The 1-9/16 inch projection of this 4 inch edge tab pull fixes the stand-off distance, which aids in planning reveals so the pull clears adjacent doors and surrounding components. The anodized satin bronze finish on the EPCO DP41-BZ-4 edge pull provides a treated surface, which supports a uniform appearance when the same pull is repeated across decorative hardware and moldings on a project.
The EPCO Edge Series tab pull has a 2 inch center to center drilling, a 4 inch overall length, and a 1-9/16 inch projection, which defines drilling layout and grip clearance on cabinets.
The back mounted design fastens from the inside face, which keeps the exterior cabinet surface free of visible fastener heads for a clean, uninterrupted look.
The DP41-BZ-4 tab pull is specified for material thickness of 1/2 to 7/8 inch, which covers many standard cabinet door and drawer front constructions.
The anodized satin bronze finish gives the aluminum pull a consistent bronze tone, which supports visual continuity when multiple pulls are installed in one space.
The 2 inch center to center spacing sets a compact drilling pattern, which is useful when mounting on narrow rails or smaller drawer fronts.
This EPCO DP41-BZ-4 pull suits decorative hardware and moldings projects where a compact anodized satin bronze edge pull is needed on 1/2 to 7/8 inch thick fronts.
The EPCO Edge Series tab pull with 2 inch center to center drilling, 4 inch overall length, and 1-9/16 inch projection gives you fixed dimensions that support consistent layouts across doors and drawers. The back mounted design for 1/2 to 7/8 inch thick material anchors the pull securely at the edge, which helps align hardware with common cabinet construction. The anodized satin bronze finish on this DP41-BZ-4 tab pull ties into decorative hardware and moldings work where a warm metal tone is part of the design. Select this anodized satin bronze tab pull when a compact, defined edge grip is needed on a run of cabinets.
Sold In: 1 Each