Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives you a low-profile way to open doors and drawers while keeping faces clear, because this pull mounts on the edge instead of the panel face. The 3 inch overall length provides a compact grip area that suits smaller cabinet doors or narrow drawer fronts where space is tight. A 2 inch center to center dimension sets consistent fastener spacing, which simplifies layout when repeating the pull across a run of cabinets. The 1-9/16 inch projection creates finger clearance at the edge, so doors can be opened easily without sticking far off the surface. Back mounted design lets the pull clamp to the door or drawer material for a clean look from the front. Construction designed for material thickness of 1/2 to 7/8 inch focuses this pull on common cabinet stock, so it integrates into typical shop workflows without workarounds.
The EPCO Edge Series tab pull uses a 2 inch center to center hole layout, so installers can position two fastener points on the back side of the door or drawer for secure mounting. Back mounted fastening keeps all attachment points on the rear face, which helps maintain a smooth front surface on doors using this decorative hardware. The 1-9/16 inch projection is fixed by the DP41-CM-3 geometry, so once the mounting holes match the center spacing, the pull aligns automatically at the edge. Material thickness between 1/2 and 7/8 inch keeps the working grip portion properly positioned, preventing the pull from sitting too shallow or too deep relative to the cabinet front.
This EPCO Edge Series 2 inch center to center charcoal metallic tab pull fits cabinet doors and drawers within the specified 1/2 to 7/8 inch material thickness, making it suited to many frameless and face frame cabinet constructions that use stocked panel sizes. The 3 inch overall length gives enough width to grab on small fronts but stays narrow enough for compact bath vanities or utility cabinets. Because the pull is back mounted, it is suited to applications where a clean, hardware-light appearance on the face is desired, such as modern kitchens or office casework. The 1-9/16 inch projection shapes the hand feel along the edge, so repeated openings on frequently used doors remain comfortable without needing a larger handle.
The 2 inch center to center charcoal metallic tab pull dimension lets installers use simple drilling jigs, cutting down layout time when repeating DP41-CM-3 across a bank of drawers or doors. Having a defined 1/2 to 7/8 inch material thickness range means the same EPCO Edge Series tab pull can be planned into multiple carcass and front combinations that share those thicknesses, reducing hardware variation on a job. The 1-9/16 inch projection determines how far the hand reaches past the door edge, which supports consistent clearances against adjacent walls or appliances. The 3 inch overall length works as a standard module size, so designers can space pulls evenly without overlapping stiles or interfering with nearby decorative hardware and moldings on the run.
The DP41-CM-3 tab pull has a 2 inch center to center spacing, a 3 inch overall length, and a 1-9/16 inch projection, so mounting holes and clearances can be planned accurately.
The EPCO Edge Series tab pull is back mounted, so fasteners pass from the rear of the door or drawer into the pull, keeping the front face free of visible attachment points.
The EPCO Edge Series tab pull is designed for material thickness of 1/2 to 7/8 inch, allowing it to clamp properly onto many standard cabinet doors and drawer fronts.
The 1-9/16 inch projection of this charcoal metallic tab pull provides finger room to open doors and drawers while staying compact to reduce interference with adjacent surfaces.
The EPCO Edge Series DP41-CM-3 tab pull is suited to cabinet doors and drawers within its thickness range, supporting clean-front residential or commercial casework layouts.
The charcoal metallic finish on this EPCO tab pull provides a dark tone that coordinates with other decorative hardware and moldings in contemporary cabinet projects.
The EPCO Edge Series tab pull with 2 inch center to center spacing and 3 inch overall length offers a repeatable module that helps standardize door and drawer layouts across a project. Its 1-9/16 inch projection and back mounted design support a clean edge grip and uncluttered faces, helping decorative hardware and moldings read as a unified design. The defined 1/2 to 7/8 inch material thickness range lets this charcoal metallic DP41-CM-3 pull serve across common cabinet constructions, so one part number can be used wherever that thickness is specified.
Sold In: 1 Each