Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives you a low-profile way to open cabinet doors and drawers while keeping faces clean. This charcoal metallic pull has a 2 inch center to center layout, so hole drilling stays simple and repeatable on small fronts. The 4 inch overall length lets the pull span more of the door edge, which spreads handling across the users fingers for a controlled feel. A 1-9-16 inch projection provides enough grip to catch with fingertips without sticking far off the cabinet line. The pull is back mounted, so fasteners drive from the inside of the panel and leave only the finished tab visible on the outside. Design for material thickness from 1-2 inch to 7-8 inch means it works across common cabinet stock, helping one part number cover multiple jobs.
This EPCO Edge Series tab pull is back mounted, so it installs from the inside of the cabinet face through the predrilled holes into the pull body. The 2 inch center to center drilling pattern keeps hole spacing tight, which is useful on small drawer fronts or narrow doors where space is limited. With a design that suits material thickness from 1-2 inch to 7-8 inch, the pull fits typical cabinet doors, drawer fronts, and panel faces used in many woodworking projects. The 1-9-16 inch projection defines how far the pull stands off the surface, so you can anticipate clearance around adjacent doors or side panels during layout.
This EPCO Edge Series tab pull belongs in cabinet and furniture projects that call for a slim, edge-grab handle along the top or side of a front. The 4 inch overall length works on smaller doors and drawers where longer handles might look oversized, while still giving enough tab for a confident pull. With a 2 inch center to center dimension, the pull lines up well on compact frameless cabinets and narrow face-frame rails. Its design for 1-2 inch to 7-8 inch material lets it sit properly on common MDF, plywood, or solid fronts sized within that range. The charcoal metallic finish ties into projects using other charcoal metallic decorative hardware, so the pull can act as part of a coordinated hardware set across a room.
The defined 2 inch center to center spacing on this DP41-CM-4 pull helps jigs and drilling templates stay simple, which reduces layout time and supports repeatability across multiple fronts. Because the pull is back mounted, the fastening happens from inside the cabinet, letting installers work from a flat interior surface and leaving only the shaped tab exposed outside. The 1-9-16 inch projection sets a predictable stand-off, so designers can plan reveals and clearances around neighboring fronts with confidence. The 4 inch overall length and edge-oriented shape guide user hand placement, which can make operation feel similar across every door and drawer where this part is used. Using the EPCO part number DP41-CM-4 on paperwork and reorders ties these dimensions and finish to a single reference, which helps maintain consistency on repeat builds or phased projects.
The EPCO Edge Series tab pull has a 2 inch center to center dimension, so holes are spaced 2 inches apart, which simplifies layout and keeps pulls aligned across fronts.
The Edge Series tab pull is designed for material thickness from 1-2 inch to 7-8 inch, so it works on a range of common cabinet door and drawer front stocks.
The EPCO tab pull has a 1-9-16 inch projection, giving fingers space to grip while keeping the pull relatively low profile on the cabinet face.
The DP41-CM-4 Edge Series pull has a 4 inch overall length, which provides a compact yet practical edge for opening smaller cabinet doors and drawers.
This Edge Series tab pull is back mounted, so fasteners install from the inside face, leaving only the charcoal metallic pull visible on the exterior.
The pull is charcoal metallic and made by EPCO, which defines the look and identifies it within EPCO decorative hardware and moldings lines.
The EPCO Edge Series tab pull in charcoal metallic gives you a defined 2 inch center to center layout, 4 inch overall length, and 1-9-16 inch projection, all matched to 1-2 inch to 7-8 inch material. Those fixed dimensions help plan consistent cabinet and furniture fronts across a run. Using EPCO part number DP41-CM-4 ties your drawings and orders to this exact back mounted Edge Series pull in the charcoal metallic finish. Specify it where a compact, edge-operated handle suits the design and workflow.
Sold In: 1 Each