EPCO Edge Series tab pull gives you a 4 inch center to center grip on doors or drawers, so hole spacing stays standard and layout is simple across a run of cabinets. The 6 inch overall length provides a wider grasping area, which helps users get a solid pull on larger or heavier fronts. The 1-9/16 inch projection creates finger space off the face of the cabinet, so hands clear the edge comfortably during use. This pull is back mounted, so it fastens from the inside of the door or drawer front and leaves the exterior face free of visible fasteners. The design is intended for material thickness from 1/2 inch to 7/8 inch, letting you cover typical cabinet door and drawer stock without changing hardware style. The charcoal metallic finish gives the tab pull a darker, modern appearance that coordinates with contemporary cabinet colors.
This EPCO Edge Series tab pull installs with a 4 inch center to center pattern, so installers can drill or bore a standard pair of holes and repeat that layout across similar fronts. The back mounted configuration means fasteners are driven from the rear of the door or drawer, so the visible edge shows only the pull profile. With an overall length of 6 inches, the pull spans more of the cabinet edge, which helps align multiple pulls in a straight visual line along the top or side of a bank of fronts. The specified fit on 1/2 inch to 7/8 inch material thickness makes this pull suitable for common cabinet substrates such as typical door and drawer front stock within that range.
The EPCO DP41-CM-6 tab pull is part of the Edge Series, so it is intended to mount at the edge of a door or drawer, giving a pull point right where users naturally reach. Its 4 inch center to center dimension lines up with standard cabinet drilling, which helps keep all hardware positions consistent between doors and drawers in a bank. The 6 inch overall length provides extra coverage along the edge, which can visually tie together multiple fronts when they are lined up in a kitchen or shop run. With a projection of 1-9/16 inches, the pull stands off the surface enough for fingers to hook from the underside or side, supporting a comfortable grip on frequently used cabinets. The design is suited for material thickness from 1/2 inch to 7/8 inch, matching a wide slice of residential and shop cabinet construction within that range.
The 4 inch center to center drilling on this charcoal metallic edge pull allows installers to use the same jig or template for every front, reducing layout variation from piece to piece. The 6 inch overall length offers a clear visual reference along the cabinet edge, which helps in aligning hardware consistently at a set distance from the corner on multiple doors. Because the pull is back mounted, the visible face stays uninterrupted, which supports projects that call for a smooth, minimalist look on painted or laminated fronts. The 1-9/16 inch projection sets a defined stand-off from the cabinet surface, so once the first pull is positioned, the rest will match that functional clearance across the job. By specifying use on 1/2 inch to 7/8 inch thick material, the pull is matched to common door and drawer front thicknesses, which helps maintain a uniform feel when opening and closing cabinets across a room.
The EPCO Edge Series tab pull has a 4 inch center to center hole spacing, a 6 inch overall length, and a 1-9/16 inch projection, giving standard drilling with comfortable hand clearance.
The back mounted design fastens from the inside of the door or drawer, so the outer face shows only the pull profile, which supports clean, uninterrupted cabinet surfaces.
The DP41-CM-6 tab pull is specified for material thickness from 1/2 inch to 7/8 inch, matching many common cabinet door and drawer front constructions in that range.
The 1-9/16 inch projection spaces the grip off the cabinet surface, giving fingers room to hook the pull without scraping the door or drawer face.
The charcoal metallic finish gives the pull a dark, metallic look that works well with contemporary or industrial-style cabinet colors and other decorative hardware.
The 4 inch center to center spacing matches common drilling patterns, allowing repeated use of the same layout or jig across multiple cabinet doors and drawers.
The EPCO Edge Series tab pull with 4 inch center to center drilling, 6 inch overall length, and 1-9/16 inch projection gives a defined, repeatable hardware choice for doors and drawers. Its back mounted design and charcoal metallic finish support clean, modern-looking cabinet faces, while the fit range for 1/2 inch to 7/8 inch thick material aligns with many cabinet fronts. For projects built around consistent drilling patterns and contemporary styling, this DP41-CM-6 tab pull offers a straightforward way to keep hardware dimensions and appearance aligned across the run.
Sold In: 1 Each