EPCO Edge Series aluminum tab pull gives you a 72 inch (1829 mm) continuous pull length, creating a clean gripping edge across long cabinet or panel runs. The 6 foot length works well when you want one straight profile instead of segmenting shorter pulls. The pull is made from aluminum, so it provides a rigid edge that supports regular cabinet use without adding significant weight to the door or drawer. Its unfinished aluminum surface offers a bare metal base that can align with raw industrial looks or be handled according to your finishing preferences outside this product. The back mounted design fastens from the rear of the material, leaving the front edge free of visible fastener heads, which supports a streamlined appearance on cabinet faces. As part of the Edge Series tab pull family, this profile is suited for projects that use a thin, integrated pull rather than projecting handles.
The DP41-L-M tab pull is back mounted, so it attaches from the rear face of the door or drawer front rather than through the front edge. This rear fastening approach leaves the exposed edge visually uninterrupted, which supports modern, flat-front cabinet styles. The 6 foot length lets you cut or position the pull along taller pantry doors or wider drawers while keeping a single continuous gripping surface. Because the profile runs along the edge, it functions as a built-in handle that does not extend far into the room, which is useful where clearance around cabinets is limited. As a back mounted solution, it also aligns well with shop workflows that drill or prepare fastening points from the inside face of casework components.
This EPCO Edge Series 72 inch aluminum tab pull is suited to cabinet or millwork projects using material between 1/2 inch and 7/8 inch thick, so it pairs with common panel thicknesses in many shops. That thickness range lets you run the same pull profile across different cabinet components, such as doors and drawer fronts, without changing to another size. Because the pull length is 6 feet, it can cover tall storage units, wardrobe-style doors, or multiple smaller fronts laid out in a continuous run, giving a uniform visual line. The tab format sits along the edge rather than on the face, which is practical when you want the cabinet front to stay visually simple while still providing a defined grip point. As part of EPCO decorative hardware and moldings in the handles and pulls class, it works naturally in cabinet, furniture, and similar woodworking settings that use edge-type pulls.
The defined material thickness range of 1/2 inch to 7/8 inch provides a clear envelope for selecting panels that will accept this tab pull without stepping outside its intended grip zone. That thickness guidance helps maintain consistent feel along the edge when doors and drawers are opened, because the pull is sized around those dimensions. The 72 inch (1829 mm) overall length offers flexibility to lay out multiple fronts from one bar, which can simplify planning repeat jobs where you use standard cabinet widths or heights. Back mounting lets installers work entirely from the rear of the panel, coordinating fastening with other interior cabinet elements on the shop floor. The unfinished aluminum body arrives as a plain metal profile, which keeps visual decisions focused on aligning this handle with surrounding decorative hardware and moldings from the same project line.
The EPCO Edge Series DP41-L-M pull has a 72 inch (1829 mm) length, allowing one continuous gripping edge across tall doors or wide cabinet sections.
The DP41-L-M tab pull is intended for material thickness from 1/2 inch to 7/8 inch, matching common cabinet and drawer front panels in many woodworking projects.
The EPCO Edge Series DP41-L-M is back mounted, so it fastens from the rear face of the panel, leaving the visible edge clear for a clean front appearance.
The 6 foot EPCO tab pull is unfinished aluminum, providing a straightforward metal look that coordinates with simple, functional cabinet hardware setups.
The 6 foot length supports spanning taller or wider cabinet sections with a single pull piece, which aids alignment and keeps the edge line visually unbroken.
The DP41-L-M pull belongs to the EPCO Edge Series within the handles and pulls class, aligning with other decorative hardware and moldings from EPCO.
The EPCO Edge Series 72 inch (1829 mm) aluminum tab pull, DP41-L-M, offers a continuous 6 foot length, a back mounted configuration, and suitability for 1/2 inch to 7/8 inch material. Those traits support clean, unified cabinet edges across tall doors, wide drawer banks, and longer runs. For projects built around edge-style pulls, this unfinished aluminum profile from Wurth Baer Supply provides a defined part number you can specify consistently across repeated cabinet or millwork jobs.
Sold In: 1 Each