Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series aluminum tab pull gives a low-profile way to open doors and drawers while keeping a clean front. The 2 inch center to center dimension sets a tight, predictable screw layout that speeds repetitive cabinet runs. Overall length of 4 inches provides enough grip area along the edge without dominating narrow fronts. A 1 9/16 inch projection creates usable finger clearance while still staying compact on shallow cabinets. The pull is back mounted, so it fastens from the inside of the door or drawer for a concealed look on the face. Design for material thickness of 1/2 to 7/8 inch targets common cabinet stock ranges, so it fits typical doors, drawer fronts, and panels in shops using standard sheet goods.
This EPCO Edge Series aluminum tab pull is back mounted, so it installs from the rear face of the door or drawer, keeping the front side free of visible fasteners. The 2 inch center to center dimension gives a fixed drilling pattern, which simplifies jig setup for multiple identical cabinets. Designed for material thickness of 1/2 to 7/8 inch, it works across most cabinet doors and drawer fronts made from common panel stock. With a 4 inch overall length, the pull sits along the edge without overpowering narrow rails, while the 1 9/16 inch projection provides practical clearance for gripping. These dimensions let installers plan reveals and handle spacing accurately along aligned banks of fronts.
The EPCO Edge Series aluminum tab pull with 2 inch center to center layout fits well on cabinet doors and drawers that need a discreet edge grip. Its 4 inch overall length lets it sit near corners of smaller drawers without crowding neighboring fronts. The back mounted configuration is suited to face-frame or frameless cabinets where a clean exterior suits the design. By targeting material thickness of 1/2 to 7/8 inch, this pull matches many shop-built cabinet doors cut from standard plywood or composite panels. The 1 9/16 inch projection helps on deeper drawers and heavier doors by giving fingers enough room to pull, which supports smooth operation in everyday kitchen, bath, or shop storage use.
The fixed 2 inch center to center spacing on the DP41-M-4 edge pull makes it straightforward to build drilling fixtures, so production shops can repeat accurate hole placement across many pieces. A consistent 4 inch overall length keeps visual alignment predictable on stacked drawers, helping lines stay even from cabinet to cabinet. The 1 9/16 inch projection is balanced to provide functional clearance without extending too far, which aids planning for tight walkways or adjacent cabinet doors. Design for material thickness of 1/2 to 7/8 inch aligns with common door and drawer stock, reducing the need to adjust construction just to suit the pull. Using the EPCO part number DP41-M-4 lets shops reorder the same pull reliably to maintain hardware continuity across phases of a project.
The EPCO Edge Series aluminum tab pull has 2 inch center to center spacing, a 4 inch overall length, and a 1 9/16 inch projection, which together define grip position and drilling layout.
The 2 inch center to center spacing provides a compact, consistent screw layout, which supports quick measuring, jig setup, and alignment on small doors and drawers.
The DP41-M-4 tab pull is designed for material thickness of 1/2 to 7/8 inch, matching many common cabinet door and drawer front constructions.
The back mounted design fastens from the inside face, leaving the front surface free of exposed screw heads, which supports a clean, modern appearance.
The 1 9/16 inch projection creates practical finger clearance behind the pull, helping users grip doors and drawers comfortably without bulky hardware.
The EPCO DP41-M-4 part number identifies this specific Edge Series aluminum tab pull, supporting consistent selection across multiple cabinet runs.
The EPCO Edge Series aluminum tab pull DP41-M-4 combines 2 inch center to center spacing, 4 inch overall length, and 1 9/16 inch projection to define a repeatable layout for cabinet fronts. Design for 1/2 to 7/8 inch material thickness suits standard doors and drawer fronts. Back mounting supports a clean, hardware-forward look while still giving dependable edge grip, making this pull a practical choice when planning coordinated cabinet hardware runs.
Sold In: 1 Each