EPCO Edge Series tab pull gives a low-profile grip at the cabinet edge using a 2 inch center to center layout, so installers get a compact handle that fits standard small-door drilling patterns and keeps fronts visually quiet on tight layouts. The 3 inch overall length provides enough finger contact to open doors and drawers without crowding adjacent pulls, which matters on narrow fronts or when hardware spacing is tight. An oil rubbed bronze anodized finish delivers a dark, consistent tone across the aluminum body, supporting coordinated hardware runs where finish uniformity is important. The pull is classified as decorative hardware and molding, so it fits cabinet and furniture applications where appearance and feel matter alongside function. As a handle and pull under the EPCO product class, it slots naturally into projects already using EPCO components.
This EPCO Edge Series tab pull is back mounted, so it fastens from the rear of the door or drawer front and leaves only the slim tab visible at the edge, which is useful when the design calls for uninterrupted faces. The pull is specified for material thickness of 1/2 inch to 7/8 inch, so it is intended to mount on common cabinet door and drawer front stock within that range and deliver proper clamping without overhang issues. A projection of 1-9/16 inch defines the working space between the edge and the outside of the pull, providing predictable knuckle clearance once installed on those material thicknesses. Being an aluminum edge pull, it ties directly into situations where a lightweight, non-ferrous pull is preferred at the panel edge.
The EPCO Edge Series tab pull is positioned as decorative cabinet hardware, so it fits cabinet doors, drawer fronts, and similar furniture panels where a grip at the top or side edge is preferred instead of a centered knob. With a 2 inch center to center screw spacing, it suits smaller fronts such as bath vanities, upper wall cabinets, or narrow drawer banks where larger pulls could look oversized. The 3 inch overall length complements this by keeping the visible metal trim narrow, which can help maintain proportion on tight rails or thin drawer faces. The 1-9/16 inch projection creates a defined space to hook fingers under the tab, which supports smooth opening even on heavier fronts used in woodworking shops or built-in installations. Because the pull is specified for 1/2 inch to 7/8 inch thick material, it serves typical cabinet construction with plywood or MDF panels and solid fronts falling in that range, making it a practical fit for many shop-built or manufactured boxes.
The 2 inch center to center dimension on this DP41-ORB-3 tab pull helps installers run precise hardware layouts, since the measurement matches a compact standard that is easy to repeat across doors and drawers using jigs or templates. Its 3 inch overall length means that once one pull is positioned, others can be aligned visually by matching edge offsets, helping maintain a consistent reveal along rows of cabinets. The 1-9/16 inch projection stays the same from front to front, so clearances between doors, adjacent cabinets, and nearby obstacles remain predictable across the run. Specifying material thickness of 1/2 inch to 7/8 inch gives a clear operating band, which supports choosing this pull when working with common cabinet stock thicknesses without altering panel construction. The anodized oil rubbed bronze finish ensures that when multiple pulls are installed on a project, the visible surfaces present a unified color tone that supports a deliberate design choice instead of a mixed-look installation.
The EPCO Edge Series tab pull has a 2 inch center to center screw spacing, 3 inch overall length, and 1-9/16 inch projection, giving a compact footprint with defined finger clearance at the cabinet edge.
The back mounted design fastens from the rear, leaving only the front tab visible, which keeps cabinet or drawer faces clean and uninterrupted for modern or minimalist layouts.
The EPCO Edge Series tab pull is specified for material thickness from 1/2 inch to 7/8 inch, matching typical cabinet doors and drawer fronts used in many woodworking projects.
The DP41-ORB-3 tab pull uses an anodized oil rubbed bronze finish on aluminum, delivering a dark, uniform appearance that coordinates with other oil rubbed bronze decorative hardware.
This EPCO decorative hardware pull is intended for cabinet doors, drawer fronts, and similar furniture panels where a slim edge-mounted grip suits the design and space constraints.
The 1-9/16 inch projection sets consistent stand-off from the panel edge, giving room for fingers to pull while keeping the hardware close to cabinetry in busy areas.
The EPCO Edge Series tab pull with 2 inch center to center spacing, 3 inch overall length, and 1-9/16 inch projection offers a compact, repeatable solution for cabinet edge gripping on 1/2 inch to 7/8 inch thick material. Its anodized oil rubbed bronze finish and aluminum construction align with projects calling for a dark decorative pull that stays visually consistent from door to door. Using the DP41-ORB-3 part across a job builds a unified look wherever this back mounted edge pull is specified.
Sold In: 1 Each