Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series 2 inch center to center tab pull gives a defined grip point on doors or drawers, so users can open fronts without touching panel faces. The anodized polished aluminum material presents a smooth metal surface that supports consistent hand contact in daily use. A center to center of 2 inches sets a fixed hole spacing that helps align multiple pulls in straight runs. The 3 inch overall length provides enough tab width for fingers to catch the pull edge comfortably. A projection of 1-9/16 inches stands the pull off the edge so hands can engage from above or the side. The back mounted design lets the pull fasten from the rear of the panel, leaving the front uninterrupted. EPCO branding identifies this part as decorative hardware intended for handles and pulls on cabinet work.
The back mounted EPCO tab pull uses rear-entry fastening to secure directly through the cabinet material, which keeps the front face free of visible fastener heads. Center to center spacing of 2 inches defines the two mounting points, so drill locations align precisely with the pull body. With an overall length of 3 inches, the pull sits along the door or drawer edge while leaving space at adjacent corners for other layout details. A projection of 1-9/16 inches establishes the working standoff from the edge, which shapes the reach angle when someone grabs the pull from above. The suitable material thickness range of 1/2 inch to 7/8 inch matches many cabinet side, drawer front, and door constructions used in woodworking projects.
This EPCO Edge Series 2 inch center to center tab pull is positioned for use on cabinet doors and drawers where a slim edge grip is preferred. The 3 inch overall length lets the pull sit along the top or side edge of a front without dominating the panel. Because the pull is back mounted, it works well on clean-faced fronts where a smooth surface is part of the design intent. The 1/2 inch to 7/8 inch material thickness range covers many standard cabinet side and door thicknesses, so the same model can serve across different pieces in the same room. Its anodized polished aluminum finish gives a metal look that coordinates with other aluminum decorative hardware and moldings from the same project category.
The defined 2 inch center to center spacing on this DP41-PA-4 EPCO tab pull supports accurate alignment when repeating pulls along a cabinet bank. Installers can base drilling templates on that fixed dimension to keep reveals and edges consistent from one front to the next. The 1-9/16 inch projection sets a stable clearance zone, which helps users grab the pull comfortably without reaching too far beyond the cabinet plane. Back mounting through the material lets the pull sit firmly against the edge, which supports a solid feel when opening heavier drawers or doors. The anodized polished aluminum surface contributes a smooth touch point that holds up to regular gripping. By fitting material thicknesses from 1/2 inch to 7/8 inch, the pull can move from drawer fronts to doors within the same cabinet line while maintaining the same hardware visual.
The EPCO Edge Series tab pull has a 2 inch center to center, 3 inch overall length, and 1-9/16 inch projection, which together define drilling layout and how far the pull stands off the cabinet edge.
The back mounted construction uses fasteners from the rear of the material so the cabinet front remains uninterrupted, supporting a smooth, clean-faced appearance around the pull.
The DP41-PA-4 pull is anodized polished aluminum, providing a bright metal look and a smooth contact surface that coordinates with other aluminum decorative hardware.
This EPCO edge pull is specified for material thickness from 1/2 inch to 7/8 inch, allowing it to serve on many cabinet doors, drawer fronts, and side panels.
The 2 inch center to center spacing gives a fixed drilling distance, which supports template use and keeps pulls aligned and repeatable across multiple cabinet fronts.
The 1-9/16 inch projection sets how far the pull extends from the cabinet edge, creating finger clearance for a comfortable grip while keeping the hardware close to the face.
The EPCO Edge Series 2 inch center to center tab pull combines anodized polished aluminum construction with a 3 inch overall length and 1-9/16 inch projection to form a compact edge grip. Its back mounted design supports uninterrupted cabinet faces. With a material range from 1/2 inch to 7/8 inch, the DP41-PA-4 part number can serve on various cabinet doors and drawer fronts within the same project. For cabinet work that calls for a slim metal edge pull with controlled spacing and projection, this EPCO model provides defined dimensions for planning layout and drilling.
Sold In: 1 Each