Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO edge series tab pull provides a compact pull point at the door or drawer edge, so you get fingertip access without bulky hardware on the face. This anodized polished brass tab pull uses a 1 inch center to center mounting, giving you a precise reference when laying out boring locations across multiple fronts. Its 1-1/2 inch overall length keeps the hardware footprint small, which helps when working on narrow rails or tight drawer stacks. The 1-9/16 inch projection creates a usable grip at the edge, so fingers catch the pull easily during everyday use. A back mounted design keeps all fasteners on the inside face, preserving a clean exterior surface. Designed for material thickness from 1/2 to 7/8 inch, this tab pull fits common cabinet door and drawer stock used in many shop-built and production installations.
This back mounted tab pull uses the 1 inch center to center spacing as the key drilling reference, so hole locations stay uniform from piece to piece. With 1-1/2 inch overall length, the pull sits close to the edge, which helps alignment when you register it to the top or side of a door or drawer front. The 1-9/16 inch projection creates a defined lip at the edge, so once mounted on 1/2 to 7/8 inch material the user has a consistent gripping point. Because the mounting occurs from the back, the fasteners draw the pull tight against the edge, which supports a solid feel in use. The anodized polished brass aluminum construction keeps the profile slim, which can help when setting reveals or working near adjacent panels.
This EPCO edge series tab pull is suited to cabinet doors and drawers built from 1/2 to 7/8 inch thick stock, so it works across many frameless and face-frame cabinet designs using those thicknesses. Its 1-1/2 inch overall length makes it a good match for smaller drawer fronts or narrow door rails where full-size pulls would crowd the layout. The 1 inch center to center dimension is compact enough for short edges, so you can position the pull near the corner without interfering with neighboring fronts. With a 1-9/16 inch projection, it creates a defined pull point at the edge, which is particularly useful on flat contemporary fronts that have no profile to grab. The anodized polished brass finish lets this aluminum pull visually align with other polished brass cabinet hardware, supporting a consistent appearance across a run of cabinetry.
The 1 inch center to center spacing on this DP41-PB tab pull gives installers a simple number for jigs and templates, which helps keep hardware perfectly aligned across doors and drawers. Its 1-1/2 inch overall length gives you a predictable distance from the mounting holes to the edge, so referencing off the top or side of the front becomes straightforward. The 1-9/16 inch projection sets a repeatable grip depth, which means users experience the same hand feel from one cabinet to the next. Designed for 1/2 to 7/8 inch material, the pull seats properly on typical cabinet stock, so edge engagement stays consistent throughout a project. The back mounted design keeps the working side of installation on the inside face, which allows layout marks and corrections to remain hidden once the job is complete.
The EPCO edge series tab pull has a 1 inch center to center measurement, which sets the distance between mounting holes for drilling and layout on cabinet doors and drawers.
The EPCO DP41-PB tab pull has an overall length of 1-1/2 inches, keeping the hardware compact for use on smaller fronts or tight cabinet layouts.
This anodized polished brass tab pull projects 1-9/16 inches, creating a defined grip at the cabinet edge for comfortable fingertip operation.
The EPCO edge series tab pull is back mounted, so it fastens from the inside face of the door or drawer, leaving the exterior surface uninterrupted.
This tab pull is designed for material thickness from 1/2 to 7/8 inch, matching many common cabinet door and drawer stock sizes.
The EPCO DP41-PB tab pull is anodized in a polished brass finish, giving aluminum hardware the appearance of polished brass for coordinated projects.
The EPCO edge series tab pull combines a 1 inch center to center layout, 1-1/2 inch overall length, and 1-9/16 inch projection to create a compact yet functional grip at the cabinet edge. With its back mounted design and fit for 1/2 to 7/8 inch material, it suits many standard cabinet constructions. The anodized polished brass finish on aluminum supports projects that call for a polished brass look while keeping the profile slim. Select this DP41-PB tab pull when you need a small-format, edge-style pull that aligns cleanly across doors and drawers.
Sold In: 1 Each