Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives a low-profile way to open cabinet doors and drawers while keeping faces clean. The 2 inch center to center drilling lines up with tight layouts, so multiple pulls can be set consistently across a run. The 3 inch overall length provides enough finger contact to grab the tab comfortably on base and wall cabinets. Polished black finish creates a defined edge line, which helps the pull read clearly against lighter materials on modern jobs. Back mounted design keeps fasteners hidden from the front, so the only visible detail is the slim pull edge. Aluminum construction keeps the pull light in weight, helping doors and smaller drawer fronts move freely.
The 2 inch center to center drilling pattern sets the hole spacing for installation, so shop layouts can be repeated across doors and drawers using a single jig setup. Back mounted fixing means holes are worked from the rear face, which pairs well with drilling operations done before finishing. The 1-9/16 inch projection determines how far the tab stands from the edge, guiding where to position the pull so fingers can hook the lip comfortably. Design for 1/2 to 7/8 inch material thickness defines the door or drawer front build, supporting straightforward use on typical cabinet stock without extra laminations.
The EPCO Edge Series tab pull works on cabinet material from 1/2 to 7/8 inch thick, aligning with many kitchen, bath, and built-in cabinet doors and drawers. The 2 inch center to center dimension fits smaller fronts where standard pulls feel oversized, allowing tight placements near edges on narrow doors. The 3 inch overall length suits both vertical and horizontal orientations, so runs of base cabinets and wall cabinets can share a single pull style. Polished black finish supports use against contrasting panels, where a dark, defined edge is desired to frame each front visually.
The 2 inch center to center spacing simplifies jig construction for installers, since a short span is easy to reference off cabinet edges. The 1-9/16 inch projection sets a clear stand-off that can be accounted for when aligning fronts near adjacent appliances or walls. Back mounted design keeps the working side of the fastener to the cabinet interior, supporting a clean front surface that relies on a single visible element. Aluminum construction keeps each pull light, which is useful on small, frequently used fronts where added mass is unnecessary. Polished black finish gives a consistent surface tone across multiple pulls, supporting uniform lines on longer cabinet runs.
The EPCO Edge Series tab pull has a 2 inch center to center dimension, which sets the hole spacing for drilling jigs and keeps pulls positioned tightly near cabinet edges.
The DP41-PBL-3 has a 3 inch overall length, giving enough tab for a solid fingertip grip while staying compact on smaller doors and drawer fronts.
This polished black tab pull projects 1-9/16 inch from the mounting surface, leaving finger clearance behind the edge without extending far into the room.
The EPCO Edge Series tab pull is back mounted, so fastening is done from the rear of the door or drawer, leaving the front face smooth and uninterrupted.
This tab pull is designed for material thickness from 1/2 to 7/8 inch, matching many common cabinet door and drawer front constructions.
The DP41-PBL-3 tab pull has a polished black finish, creating a sharp edge detail that stands out strongly against light-colored cabinet surfaces.
The EPCO Edge Series tab pull DP41-PBL-3 pairs a 2 inch center to center layout with a 3 inch overall length and 1-9/16 inch projection, aligning well with tight cabinet runs. Choose this polished black, back mounted pull when a slim, aluminum edge detail fits your cabinet plan.
Sold In: 1 Each