EPCO Edge Series tab pull gives a simple way to open doors or drawers by gripping the edge instead of a large handle, which suits modern cabinet layouts where a low-profile pull is preferred. The 2 inch center to center drilling spaces the fasteners for a compact footprint, so the pull fits narrow rails or tight drawer fronts without crowding. Its 4 inch overall length provides enough finger contact area for a solid grip, which helps when opening heavier drawers or tight doors. The pull uses a back mounted design, so it fastens from the inside of the panel and leaves the front face clear of visible fasteners. An anodized stainless steel finish on the aluminum body provides a stainless look surface, which coordinates with many hinges or appliances in the same tone.
This EPCO tab pull uses a back mounted attachment method, so installation is handled from the rear of the door or drawer front and leaves only the pull visible at the front edge. The specified 2 inch center to center dimension sets the hole spacing, which allows installers to use jigs or CNC programs for accurate, repeatable drilling. A 1-9/16 inch projection defines how far the pull extends from the front surface, which is important when aligning multiple pulls so they clear adjacent doors, drawer fronts, or nearby trim. The design is intended for material thickness of 1/2 inch to 7/8 inch, which covers many common cabinet door and drawer front builds in shop or onsite work.
The EPCO Edge Series 2 inch center to center anodized stainless steel tab pull is designed to mount at the edge of a panel, which makes it well suited for cabinet doors or drawer fronts where a discreet grip is preferred over a larger handle. Its 4 inch overall length allows it to span a portion of the edge, which gives fingers a defined area to pull from while keeping the visual impact minimal on the face. The pull is intended for material thickness of 1/2 inch to 7/8 inch, so it aligns with many standard cabinet door and drawer constructions without requiring special build-ups. With a 1-9/16 inch projection, the pull stands off the face enough for most users to hook fingers behind it, which can help when operating heavier or self-closing hardware that needs a firm pull.
The 2 inch center to center measurement on this DP41-SS-4 tab pull gives a defined drilling pattern, which helps maintain alignment when installing multiple pulls along a cabinet bank. Using the same 2 inch spacing across doors and drawers keeps the pulls visually consistent, which is particularly important in modern kitchens or casework runs where straight lines highlight any variation. The specified 1-9/16 inch projection controls how far the pull extends into the room, which helps installers set clearances so doors and drawers operate without interference from adjacent fronts or nearby walls. By matching a material range of 1/2 inch to 7/8 inch, the pull is sized to grip securely on typical cabinet thicknesses, which supports solid fastening and long-term function once mounted.
The EPCO Edge Series tab pull has a 2 inch center to center spacing, which sets the distance between mounting points for accurate drilling and consistent layout.
The DP41-SS-4 tab pull has a 4 inch overall length, which provides a comfortable gripping area along the cabinet edge while keeping a compact appearance.
The EPCO tab pull has a 1-9/16 inch projection, which creates enough space to catch fingertips behind the pull for reliable opening of doors and drawers.
The tab pull is intended for material thickness of 1/2 inch to 7/8 inch, which matches many standard cabinet door and drawer front constructions.
This EPCO Edge Series tab pull is back mounted, so it attaches from the rear of the panel and leaves no visible fasteners on the front face.
The DP41-SS-4 tab pull has an anodized stainless steel finish, which provides a stainless toned look that coordinates with many cabinet hardware pieces.
The EPCO Edge Series 2 inch center to center anodized stainless steel tab pull brings clear mounting dimensions and a restrained profile, which supports clean front designs on cabinet doors and drawers. Its 4 inch overall length and 1-9/16 inch projection combine to create a usable finger hold that still keeps the hardware visually light. With a back mounted design for 1/2 inch to 7/8 inch material thickness, this DP41-SS-4 pull fits neatly into many cabinet construction standards. For projects that call for an edge-mounted grip with defined center to center spacing, this tab pull offers a straightforward way to standardize layouts.
Sold In: 1 Each