Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series 2 inch tab pull gives you a low-profile grip at the cabinet edge while keeping the door face clear, which suits modern runs where you want a clean look without protruding handles. The 2 inch center to center dimension sets consistent spacing for drilling, so repeated cabinet layouts stay uniform from box to box. A 3 inch overall length adds just enough finger access at the edge, helping doors and drawers open smoothly without needing extra projection into the walkway. The 1-9/16 inch projection provides a usable hand grip while staying compact, which helps on tight galley runs or closely spaced cabinet banks. Gloss white powdercoat finish layers color over the pull, matching white cabinet schemes visually while covering the aluminum underneath. The EPCO brand and handles and pulls classification position this as decorative hardware that also does everyday opening work on cabinets.
The back mounted configuration uses holes through the door or drawer front, so the EPCO gloss white tab pull seats at the edge while fasteners grip from behind for a secure hold. The 2 inch center to center spacing controls hole placement, which helps templates line up repeatably across banks of cabinets. With a 3 inch overall length, positioning along the edge is straightforward, as the pull defines a small but clear grabbing point near the corner or mid-span. The stated material thickness range of 1/2 to 7/8 inch tells you where the pull is meant to clamp, matching typical cabinet door and drawer front constructions in shops and on site. Projection of 1-9/16 inch affects how the hand approaches the edge, giving enough stand-off from the panel face so fingers can wrap comfortably when opening.
The EPCO Edge Series 2 inch center to center gloss white powdercoat tab pull works well on cabinet doors and drawer fronts built from 1/2 to 7/8 inch thick material, because that is the range the pull is designed to mount on. In decorative hardware and moldings applications, the 3 inch overall length creates a compact grip at the top or side edge, which suits frameless cabinets or flush fronts that rely on edge hardware instead of face-mounted handles. The gloss white powdercoat finish ties into white casework, so the pull visually blends with painted or laminate fronts rather than standing out as a contrasting element. Its placement as a back mounted handle and pull lets the working parts stay on the interior face, leaving the exterior appearance focused on the slim tab only. For woodworking shops, that balance of function and minimal footprint helps standardize a modern look across multiple projects using the same DP41-WH-3 part number.
The defined 2 inch center to center hole spacing on this DP41-WH-3 cabinet pull simplifies jig design, which supports fast, repeatable drilling when running volume cabinet work. Because the projection is fixed at 1-9/16 inch, door overlays and drawer clearances can be planned confidently, reducing layout adjustments once hardware is on. The 3 inch aluminum edge pull length sets a predictable visual proportion along the door or drawer edge, which helps align multiple pulls in a straight run for consistent sightlines. The stated material thickness range of 1/2 to 7/8 inch informs panel build decisions, so fronts can be kept within that band and accept this hardware without modification. Gloss white powdercoat finish maintains a uniform color on each pull, which supports matching replacements or additions using the same EPCO handles and pulls profile later in a project.
The EPCO Edge Series 2 inch tab pull is back mounted, so it fastens from the rear of the door or drawer front and leaves only the slim pull visible on the exterior face.
The DP41-WH-3 cabinet pull has a 3 inch overall length, which creates a compact tab along the edge while still giving enough room for fingers to grip comfortably.
This gloss white powdercoat pull uses 2 inch center to center hole spacing, allowing simple, repeatable drilling patterns on cabinet doors and drawer fronts.
The EPCO edge pull is designed for material thickness of 1/2 to 7/8 inch, matching common cabinet door and drawer front constructions in woodworking projects.
This aluminum edge pull projects 1-9/16 inch from the surface, giving practical finger clearance while staying compact on cabinet faces.
The tab pull has a gloss white powdercoat finish, providing a solid white appearance that pairs well with matching cabinet fronts.
Choose the EPCO Edge Series 2 inch tab pull when a gloss white powdercoat finish, back mounted attachment, and 2 inch center to center pattern match your cabinet plans. The 3 inch overall length, 1-9/16 inch projection, and 1/2 to 7/8 inch material range align with typical door and drawer construction in many woodworking shops. Using a consistent DP41-WH-3 cabinet pull across a project keeps drilling, mounting, and visual alignment straightforward from cabinet to cabinet.
Sold In: 1 Each