EPCO Edge Series tab pull delivers a low-profile grip that mounts along the cabinet edge, so faces stay clean while doors and drawers still open comfortably. The aluminum pull has an overall length of 6 inches, giving enough hand contact across typical cabinet widths for steady operation. A 4 inch center to center drilling dimension matches common handle layouts, simplifying layout when replacing existing pulls that share this hole spacing. The projection of 1-9/16 inches provides finger clearance off the door or drawer face, which helps users grab the pull without rubbing knuckles against the surface. Back mounting keeps all fastening from the rear side of the panel, so the front presentation is uninterrupted by visible fasteners. The gloss white powdercoat finish creates a consistent surface appearance along the exposed edge, which supports a uniform look when coordinating multiple pulls across a project. The tab pull design suits cabinet and furniture projects that favor a streamlined style.
The edge pull is back mounted, so it fastens through the cabinet door or drawer front from the rear, which lets installers secure the pull while leaving the visible edge free of front-side fastener heads. Its 4 inch center to center measurement defines the distance between the mounting points, helping drilling templates and CNC programs line up accurately. The 6 inch overall length positions the grip section so fingers land comfortably near the center of the pull during use. A projection of 1-9/16 inches provides stand-off from the panel, which supports good hand clearance without extending far into walkways. The pull is specified for material thickness from 1/2 inch to 7/8 inch, covering a range that aligns with many cabinet door and drawer front constructions in plywood, MDF, or solid stock. Within that thickness range, the tab can seat properly over the edge for consistent alignment across multiple fronts.
This EPCO Edge Series tab pull belongs to the decorative handles and pulls category, so it fits projects where hardware is part of the visible design. The gloss white powdercoat finish lets it blend into white casework or stand out against contrasting colors, which supports both matching and accent layouts. With an overall length of 6 inches, it suits many base and wall cabinet doors as well as wider drawers where a longer handhold is preferred. The 4 inch center to center dimension ties into a common specification for handles and pulls, helping it work in layouts already based on that drilling standard. Back mounted construction and an edge-style tab profile suit modern flat-panel doors, where the pull sits at the top or side edge without interrupting the main door surface. Because the pull is specified for material thickness from 1/2 inch to 7/8 inch, it works across typical door and drawer fronts in residential and commercial casework.
The 4 inch center to center drilling distance gives a clear reference for jigs or shop setups, which supports repeatable hole placement across multiple fronts in a run. Aligning to that known spacing helps installers maintain straight hardware lines and consistent reveals between doors and drawers. The 6 inch overall length provides predictable coverage along the edge, so multiple pulls mounted in sequence show the same proportion of metal relative to the door width. A 1-9/16 inch projection defines how far the pull extends from the face, setting a consistent hand-feel from cabinet to cabinet. The edge pull profile works with material thickness from 1/2 inch to 7/8 inch, so shops using different core materials can keep the same hardware specification without changing the basic door build. Back mounted fastening keeps the visible edge uninterrupted, which simplifies alignment by letting installers reference the edge itself rather than exposed fastener heads. The manufacturer part number DP41-WH-6 identifies this exact gloss white configuration, supporting accurate repeat ordering when matching existing installations.
The EPCO Edge Series tab pull has a 4 inch center to center dimension, which helps it line up with drilling patterns based on this common handle spacing.
The tab pull has an overall length of 6 inches, giving a longer gripping area that works well on cabinet doors and drawers across kitchens and other casework.
The pull has a projection of 1-9/16 inches, creating space for fingers to hook behind the tab while keeping the hardware relatively close to the surface.
The back mounted design fastens from the rear of the panel, so the front edge stays clear of visible fasteners and alignment follows the door or drawer edge.
The EPCO edge pull is specified for material thickness from 1/2 inch to 7/8 inch, covering many common cabinet door and drawer front constructions.
The pull has a gloss white powdercoat finish and is identified by manufacturer part number DP41-WH-6, which defines this specific color and style.
The EPCO Edge Series tab pull combines a 4 inch center to center drilling dimension with a 6 inch overall length, giving a practical layout for many cabinet fronts. Its back mounted style and 1-9/16 inch projection support comfortable operation while keeping profiles tight to the casework. The gloss white powdercoat ties into white decorative hardware schemes, so designers can carry a unified look across doors and drawers. With a material thickness range from 1/2 inch to 7/8 inch, this pull fits many standard cabinet constructions. For projects built around edge-mounted operation and a clean front appearance, this DP41-WH-6 model aligns well with that hardware approach.
Sold In: 1 Each