Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO edge pull DP42-BL-3 is a 3 inch (76 mm) length anodized satin black tab pull that gives cabinet doors and drawers a low-profile gripping point along the edge. The pull is part of the EPCO Edge Series, so it is shaped to mount at the top edge and present a simple tab to grab during everyday use. The projection is 2 inches, which creates enough finger clearance to open doors and drawers comfortably while keeping the hardware tight to the front. The pull is for material thickness from 5/8 inch to 1-1/4 inch, so it handles common cabinet stock ranges from lighter doors to thicker drawer fronts. The anodized satin black finish sits in the decorative hardware category, supporting contemporary cabinet layouts that call for a dark, uniform pull line.
This EPCO Edge Series pull is described as top mounting, so it is designed to sit along the top edge of a door or drawer front and present its tab downward or forward. The no holes/no screws description means the pull body itself is not pre-drilled, which leaves drilling patterns and fastener positions to the fabricator or installer where required by the project. With a 3 inch length and 2 inch projection, the tab section defines a compact zone to work around during layout, helping keep hole placement and edge distances predictable on repetitive runs. The pull is meant for panel material thickness from 5/8 inch to 1-1/4 inch, which supports alignment across different cabinet lines where front thickness varies.
The EPCO DP42-BL-3 edge pull is categorized under decorative hardware and moldings, handles and pulls, so it is suited for visible cabinet and furniture fronts where the pull becomes part of the finished look. Its 3 inch length concentrates the gripping zone, which works well on narrower doors, smaller drawers, or as repeated pulls across a longer bank of cabinets. The 2 inch projection creates usable clearance even when doors are flush, making it practical on frameless cabinet runs. Being specified for material thickness from 5/8 inch to 1-1/4 inch, the pull matches common cabinet door and drawer front thicknesses used in both residential and commercial woodworking.
The defined 3 inch (76 mm) length and 2 inch projection on the DP42-BL-3 give consistent reference dimensions, which helps lay out pulls in straight lines and predictable offsets along a bank of doors. The top mounting design standardizes how the pull relates to the panel edge, so once an installer establishes an edge distance and orientation, the same approach carries across a project. The stated material thickness range from 5/8 inch to 1-1/4 inch means one pull specification can serve different front constructions on the same job without changing the basic pull type. The anodized satin black finish supports uniform color across multiple pulls, which is important when matching decorative hardware and moldings in a space.
The EPCO DP42-BL-3 is an Edge Series 3 inch anodized satin black tab pull, so it functions as a small edge-mounted handle for doors and drawers.
The DP42-BL-3 is described as top mounting, meaning it positions along the top edge of the panel, which helps keep the pull alignment consistent from front to front.
The DP42-BL-3 is for material thickness from 5/8 inch to 1-1/4 inch, so it covers common cabinet door and drawer front thicknesses.
The DP42-BL-3 has a length of 3 inches (76 mm) and a projection of 2 inches, creating a compact but usable finger grip at the edge.
The DP42-BL-3 is anodized satin black, providing a dark, smooth decorative surface suited to modern cabinet hardware schemes.
The DP42-BL-3 is described as no holes/no screws, so the pull body is not pre-drilled, giving flexibility in how it is secured on the project.
The EPCO edge pull DP42-BL-3 pairs a 3 inch length with 2 inch projection and top mounting, giving a compact, repeatable grip solution at the top edge of doors and drawers. Its fit for 5/8 inch to 1-1/4 inch material thickness means one pull style can serve multiple cabinet constructions on a job. The anodized satin black finish aligns with decorative hardware needs where a clean, dark tab pull is part of the design. For cabinetry that benefits from a consistent, edge-mounted tab handle, this EPCO Edge Series pull provides a clearly defined option.
Sold In: 1 Each