EPCO Edge Series 72 tab pull gives a continuous 72 inch (1829 mm) length pull that spans long cabinet or panel runs in one piece, which helps create an uninterrupted gripping surface along the edge. The anodized satin clear aluminum material provides a neutral metallic finish that works across many cabinet colors while maintaining the aluminum surface. A 2 inch width across the pull gives generous finger room at the edge, which supports a confident grip when opening tall or heavy fronts. The top mounting design positions the pull on the top of the panel, so the pull can be accessed from above the door or drawer edge. This pull is described as ALUM PULL, NO HOLES/SCREWS, 6FT L, 2INW, which means the bar arrives without pre-drilled holes, allowing drilling locations to be laid out to match the job. The DP42-L-A part number identifies this specific Edge Series profile and finish.
The EPCO Edge Series 72 inch tab pull uses a top mounting approach so the pull sits along the top edge of the door or drawer front, giving direct overhand access when the user reaches for the cabinet. Because the pull has no holes preset, hole placement can be laid out to match existing drilling patterns, hinge clearances, or internal hardware locations on each job. The 6 foot length gives flexibility to cut the pull to size where project conditions call for shorter sections, while still starting from a full-length bar for long runs. The 2 inch width means the pull extends a noticeable distance from the panel edge, which can help users get a solid grip without needing additional hardware types.
The EPCO Edge Series 72 inch (1829 mm) anodized satin clear aluminum tab pull is suited to runs where a single, continuous pull is desired across the top of cabinetry, because the full 6 foot length spans long stretches without breaks. Its classification under decorative hardware and moldings, handles and pulls places it among components used on doors and drawers, so it fits projects where a slim top-mounted grip is preferred over larger handles. The 2 inch width forms a noticeable tab at the front edge, allowing fingers to catch the pull along the entire run, which can be helpful on tall pantry doors or wide drawers that benefit from a broader gripping strip. The neutral satin clear aluminum finish allows this pull to be used in spaces where a metal accent is part of the design, such as contemporary shop fixtures or modern residential cabinetry that specify aluminum details.
The 72 inch bar length means fewer joints or transitions along a bank of cabinets, which reduces alignment work between multiple shorter pulls and helps maintain a straight, clean appearance. Because the pull is specified with no holes and no screws in the description, installers determine the drilling pattern on site, so they can place fastening points to avoid conflict with hinges, slides, or internal partitions. The anodized satin clear aluminum treatment stabilizes the surface color across the pull, which supports consistent appearance when multiple pieces of DP42-L-A are used in the same room. Top mounting places the pull exactly where hands approach the cabinet, which can streamline motion for users compared with pulls placed lower on the face. Being sold as each allows planners to count individual 6 foot lengths needed for a project run by run, so ordering ties directly to cabinet linear footage. Identifying the pull by manufacturer part DP42-L-A simplifies reordering or matching on later phases of the same job.
The EPCO Edge Series 72 tab pull measures 72 inches (1829 mm) in length, which lets it run across wide cabinets or multiple fronts to create a single, continuous gripping edge.
The DP42-L-A aluminum tab pull is described as 2 inches wide, giving a broader tab area along the cabinet edge for finger contact and leverage when opening doors or drawers.
This aluminum tab pull is specified for top mounting, so it is installed along the top edge of the door or drawer front where users naturally reach from above.
The EPCO Edge Series pull uses an anodized satin clear aluminum finish, providing a neutral metallic look that coordinates with other aluminum components in the installation.
The no holes/no screws description means the 6 foot pull bar is supplied without pre-drilled mounting holes, allowing installers to drill fastening points based on their project layout.
The DP42-L-A pull is described as packing and sold in each, so ordering one unit provides a single 6 foot length for use on a cabinet run.
The EPCO Edge Series 72 inch anodized satin clear aluminum tab pull DP42-L-A suits projects that call for a long, continuous top-mounted grip with a 2 inch wide face along the cabinet edge. The full 6 foot length supports layout flexibility, from spanning wide sections to cutting shorter pieces where needed. The no holes/no screws description keeps hole placement under installer control so drilling can match each specific run. For cabinet jobs that specify aluminum decorative hardware and moldings in handle and pull form, this part offers a defined size, finish, and mounting style ready to match against cabinet dimensions and design.
Sold In: 1 Each