Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives you a compact 1-1/2 inch length pull that fits tight cabinet layouts where a full-size handle would crowd the faces. The anodized oil rubbed bronze finish provides a dark, uniform appearance that stays consistent from pull to pull. The pull is designed for material thickness from 5/8 inch to 1-1/4 inch, so it works across common cabinet door and drawer stock without changing your machining approach. A 2 inch projection brings the gripping point forward, which creates space for fingers while keeping the hardware footprint small. The tab pull uses a top mounting orientation, positioning the pull right at the front edge where users naturally reach. EPCO branding and the DP42-ORB part number clearly tie this tab pull to the Edge Series line for straightforward repeat ordering on future jobs.
This EPCO aluminum edge pull uses a top mounting orientation, so it sits over the edge at the front of the cabinet component where users expect to grab. The specified material thickness range of 5/8 inch to 1-1/4 inch means one pull model spans many cabinet door and drawer builds, which simplifies planning when mixing different constructions on the same run. The 2 inch projection defines how far the tab stands off the face, which helps lay out clearances between adjacent fronts and nearby obstacles. The short 1-1/2 inch overall length keeps layout simple at small drawer widths, leaving room at the sides while still providing a defined grip point.
The EPCO Edge Series tab pull with 1-1/2 inch length fits situations where a small footprint pull is needed at the front edge of a cabinet door or drawer. Its top mounting orientation puts the tab directly at the working edge, which suits flat-panel cabinet faces where a front-mounted handle is not desired. The specified 5/8 inch to 1-1/4 inch material thickness range means it can be applied across different cabinet lines in the same space, such as doors in one thickness and drawer fronts in another. The 2 inch projection provides a defined gap between the face and the handhold, helping users get their fingers behind the tab without contacting the door or drawer edge repeatedly.
The 1-1/2 inch length on this EPCO DP42-ORB tab pull gives installers a repeatable reference when laying out pulls on narrow or standard-width fronts, which keeps the visual rhythm consistent from cabinet to cabinet. The 2 inch projection dimension remains constant job to job, helping maintain uniform reach and clearance in a run of cabinets and reducing variation in how the hardware feels in use. The specified 5/8 inch to 1-1/4 inch material thickness capability allows the same pull to be applied as designs change thickness within that range, which reduces part changes during a project. The anodized oil rubbed bronze finish is applied to the aluminum pull body, tying color and surface appearance to the Edge Series line so replacements visually align with existing pulls.
The EPCO DP42-ORB tab pull is specified for material thickness from 5/8 inch to 1-1/4 inch, so it works across common cabinet door and drawer stock in that range.
The 1-1/2 inch length keeps the pull compact, which helps on narrow drawers or tight reveals where longer pulls could crowd adjacent fronts.
The 2 inch projection moves the gripping surface forward from the face, giving users finger clearance while keeping the pull visually minimal.
This EPCO Edge Series tab pull uses a top mounting orientation at the front edge, positioning the grip where users naturally reach on the door or drawer.
The EPCO DP42-ORB tab pull has an anodized oil rubbed bronze finish, providing a dark appearance that coordinates with other oil rubbed bronze decorative hardware.
The Edge Series name and DP42-ORB part number give a clear reference, so the same pull can be ordered again to match existing installations.
The EPCO Edge Series tab pull DP42-ORB combines a 1-1/2 inch length, 2 inch projection, and top mounting layout, so it suits compact cabinet faces that still need a clear grip point. The anodized oil rubbed bronze finish and defined 5/8 inch to 1-1/4 inch material range help align appearance and fit on doors and drawers within that specification. When a project calls for a small-format edge pull that coordinates with oil rubbed bronze decorative hardware, this EPCO aluminum edge pull offers a consistent geometry and finish you can repeat across multiple installations.
Sold In: 1 Each