Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 4 inch aluminum pull gives you a 4 inch center to center mounting layout, so it lines up with standard drill patterns on many cabinet doors and drawers and keeps layout straightforward on new work or replacements. The overall length of 4-3/8 inches provides a little extra grip area beyond the mounting centers, which helps when users grab the handle from different angles in tight spaces. The pull has a projection of 7/8 inch from the mounting surface, giving fingers clearance while keeping the handle close to the face of the cabinet for a clean, compact profile. The aluminum construction provides a light handle that is easy to work with during installation on cabinet fronts. A satin lacquer finish on the aluminum pull offers a muted sheen on the surface, which supports a consistent look across runs of doors and drawer fronts.
The 4 inch center to center layout on this EPCO pull defines the exact spacing between mounting points, so installers can drill or reuse holes at that distance for consistent handle alignment across cabinet doors and drawers. With an overall length of 4-3/8 inches, the handle extends slightly past the mounting holes, which helps visually balance smaller cabinet fronts and can help conceal minor edge chipping around bore points. The 7/8 inch projection sets the stand-off from the cabinet surface, giving users space to pull with fingertips while keeping the handle from protruding excessively on face frames or frameless cabinet designs. The 102 mm center to center measurement corresponds to the 4 inch spacing, providing metric reference when working from European or metric-based layouts in the shop.
The EPCO 4 inch aluminum pull is identified as a handle and pull within decorative hardware and moldings, so it suits cabinet doors and drawers where a compact, straight pull is needed. The 4 inch center to center spacing fits layouts designed around that common mounting distance, which is helpful on many kitchen, bath, and shop cabinet runs that follow this pattern. The 4-3/8 inch overall length gives the pull a proportion that matches small to mid-size fronts, so it can be used across upper cabinets, base units, and utility storage doors with a consistent appearance. The 7/8 inch projection allows fingers to wrap behind the pull while leaving the handle close to the cabinet plane, which is useful on narrow walkways or work areas where hardware depth needs to stay modest. The satin lacquer finish on the aluminum face supports decorative use where a smooth, understated look is preferred rather than a high-reflectivity surface on cabinet hardware.
The defined 4 inch center to center mounting dimension on the EPCO DP433-4-SL pull gives installers a fixed drilling reference, which supports straight runs of holes across multiple fronts and reduces layout variation between cabinets. Because the same spacing is expressed as 102 mm, shops working in metric can set jigs or boring equipment using metric scales while still matching the 4 inch on-center requirement. The 4-3/8 inch overall length provides slight overhang beyond each mounting point, which can visually tie adjacent fronts together when handles are aligned in rows. The 7/8 inch projection controls how far the pull stands off the surface, so installers know the clearance they are building into drawer stacks or door swings. The aluminum construction combined with the satin lacquer surface gives a consistent finish reference for matching this handle across a complete project where the same style and part number need to repeat.
The EPCO 4 inch aluminum pull has a 4 inch center to center dimension, so mounting holes are drilled or aligned 4 inches apart for consistent cabinet handle spacing.
The EPCO DP433-4-SL handle has an overall length of 4-3/8 inches, which extends slightly beyond the mounting centers for added grip area on cabinet fronts.
The aluminum pull has a 7/8 inch projection from the mounting surface, providing finger clearance while keeping the hardware profile relatively low on doors and drawers.
The EPCO pull is made from aluminum with a satin lacquer finish, giving a smooth, muted surface that supports a consistent decorative hardware appearance.
The 102 mm center to center size matches the 4 inch spacing, which aids metric-based shop setups when boring or aligning cabinet handle holes.
The DP433-4-SL manufacturer part number identifies this specific EPCO aluminum pull, helping match the same handle style and dimensions across a project.
The EPCO 4 inch aluminum pull with 4 inch center to center spacing and 4-3/8 inch overall length offers a defined handle size for cabinet doors and drawers. The 7/8 inch projection and satin lacquer finish on the aluminum body provide a controlled profile and appearance that can repeat across kitchens, baths, or shop casework. With the DP433-4-SL part number and 102 mm center to center metric reference, it fits projects set up around this common on-center handle layout. Use this pull when a compact, straight aluminum handle is needed to match 4 inch drilling patterns on decorative cabinet hardware.
Sold In: 1 Each