Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3-3/4 inch aluminum pull sets a 96 mm center to center dimension, giving cabinetmakers a consistent drilling pattern that speeds layout on doors and drawers. The 4 inch center to center sizing aligns with many standard jigs and templates, helping maintain repeatable spacing across a run of cabinets. The overall length of 4-3/8 inches provides enough hand contact area for a secure grip without crowding adjacent hardware on narrow fronts. A 7/8 inch projection positions the pull off the face of the cabinet, creating finger clearance while keeping the hardware tight to the surface for a clean look. The aluminum construction keeps weight low on moving fronts, which supports smooth door and drawer operation. The satin lacquer finish on the aluminum creates a uniform appearance that helps visually tie multiple fronts together in kitchens, offices, or built-ins.
The 96 mm center to center spacing on this EPCO aluminum pull gives a clear drilling reference for both new cabinet construction and retrofits. The 4 inch center to center sizing aligns with many metric and imperial layout systems, allowing installers to use existing templates for fast hole location. With a 4-3/8 inch overall length, the pull positions mounting points slightly inboard from the visible ends, which helps distribute load across the cabinet face. The 7/8 inch projection defines how far the pull stands off the surface, guiding placement on doors and drawers where clearance and reach are planned together. These fixed dimensions let installers repeat the same layout across a room, helping keep handles straight, level, and visually consistent from one front to the next.
The EPCO DP433-96-SL aluminum pull, with its 96 mm center to center dimension, fits well on cabinet doors and drawers designed around metric spacing. That center to center size also corresponds closely to 3-3/4 inch layout, which works in many residential and commercial cabinet programs using mixed measuring systems. The 4-3/8 inch overall length suits mid-size fronts such as kitchen doors, vanity drawers, and utility cabinets, where a compact handle still needs enough span for a reliable grip. On taller doors, multiple pulls at this length can be lined up using the same 96 mm drilling pattern to create a uniform handle line. The 7/8 inch projection helps this pull function on doors near walls or appliances by limiting how far it extends into walkways while still allowing full finger access at the back of the pull.
The 96 mm center to center measurement on this EPCO 3-3/4 inch aluminum pull supports repeatable installations because it gives installers a fixed distance they can build into jigs and drilling guides. Using that measurement, holes can be indexed quickly along drawer runs or door rails, reducing layout time from piece to piece. The 4-3/8 inch overall length further stabilizes the visual alignment because it defines a consistent edge distance from the pull ends to cabinet borders, helping keep handles balanced on narrow and wider fronts. A 7/8 inch projection contributes to everyday usability by establishing predictable clearance for fingers, which is important when multiple pulls are aligned side by side across banks of drawers. The combination of aluminum construction and satin lacquer finish keeps the visible surfaces uniform, so once the layout is dialed in, every installed pull presents a consistent look across the project.
The EPCO DP433-96-SL aluminum pull has a 96 mm center to center dimension, giving a fixed drilling distance that supports accurate hole layout on cabinet doors and drawers.
The EPCO DP433-96-SL has an overall length of 4-3/8 inches, which provides enough span for a comfortable grip while fitting well on mid-size cabinet fronts.
This aluminum pull has a 7/8 inch projection, positioning it off the cabinet face to allow finger clearance while keeping the profile relatively close to the door or drawer.
The EPCO pull is made from aluminum with a satin lacquer finish, giving a smooth, consistent appearance that coordinates across multiple cabinet fronts.
The 96 mm spacing provides a standard hole distance that can be matched to drilling jigs, helping installers repeat the same layout quickly on multiple cabinets.
The manufacturer part number is DP433-96-SL, which identifies this specific EPCO 96 mm center to center satin lacquer aluminum pull for ordering and planning.
The EPCO 3-3/4 inch aluminum pull with 96 mm center to center spacing, 4-3/8 inch overall length, and 7/8 inch projection offers fixed dimensions that translate directly into predictable layouts. The aluminum construction and satin lacquer finish provide a consistent appearance across doors and drawers. Using the DP433-96-SL part from Wurth Baer Supply supports projects where repeatable drilling patterns, coordinated sizing, and a uniform satin look are important on finished cabinet installations.
Sold In: 1 Each