Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO anodized satin black edge pull is a back mounted aluminum handle designed to give a clean grip point on cabinet or furniture fronts. The 1-7/8 inch (48 mm) center to center dimension sets the mounting hole spacing, which helps when laying out consistent pulls across multiple doors or drawers. The 3-7/8 inch overall length defines the visible size of the pull, which matters when aligning with door proportions or matching existing hardware runs. The anodized satin black finish treats the aluminum surface, which provides a uniform dark appearance suited to modern cabinet styles. Being an edge pull, it mounts at the door or drawer edge, which lets you operate the panel without a protruding traditional handle profile. The EPCO DP43-BL part number identifies this specific configuration, which matters when reordering or matching to existing EPCO installations.
The EPCO DP43-BL edge pull is back mounted, so it fastens from the rear of the door or drawer through to the pull, which creates a clean front edge and supports a solid mechanical connection. The 1-7/8 inch (48 mm) center to center measurement sets the exact drilling distance between mounting points, which supports accurate boring whether using a template or manual layout. This pull is specified for material thickness from 1/2 inch to 7/8 inch, which defines the range of door or drawer front thicknesses where the standard mounting arrangement is suited. The use of #6 x 5/8 inch screws provides a known fastener size and length, which fits typical cabinet-grade material within that thickness range without excessive projection through the rear face.
The EPCO anodized satin black edge pull is specified as a decorative handle within the Handles and Pulls category, which aligns it with cabinet doors, drawer fronts, or similar furniture panels where a low-profile grip is needed on the edge. The 1-7/8 inch (48 mm) center to center spacing suits smaller fronts or narrow rails, which helps when space is limited near corners or on compact drawers. Its 3-7/8 inch overall length offers a modest handle span, which works well on residential or light commercial cabinetry where a subtle pull is preferred. The material thickness range of 1/2 inch to 7/8 inch sets a clear envelope for mounting, which matches many common cabinet door and drawer front constructions used in shop-built or manufactured casework. The anodized satin black finish lets this pull coordinate with other black decorative hardware and fittings, which can support a unified look on full kitchen or office installations.
The defined 1-7/8 inch (48 mm) center to center dimension allows fabricators to set up drilling jigs once, which helps maintain consistent handle placement across long cabinet runs. The back mounted construction keeps the fixing points hidden from the front, which supports a clean line along the edge and reduces visual interruption on flat panel designs. Specifying #6 x 5/8 inch screws gives a predictable bite into 1/2 inch to 7/8 inch material, which supports secure fastening without exceeding the thickness envelope of typical fronts. The 3-7/8 inch overall length can be used as a reference when aligning multiple pulls by sight, which helps installers keep handles parallel and evenly spaced along doors or drawer banks. Identifying the pull by manufacturer part DP43-BL provides a precise reference for drawings, cut lists, or ordering, which reduces confusion when similar sizes or finishes exist in the same job.
The EPCO DP43-BL edge pull has a 1-7/8 inch (48 mm) center to center spacing, which sets the drilling distance between mounting holes during cabinet or drawer front layout.
The EPCO DP43-BL pull has a 3-7/8 inch overall length, which defines the visible footprint on the door or drawer edge during installation and layout.
The EPCO DP43-BL edge pull is back mounted, so it attaches from the rear face of the material through to the pull, leaving a clean front edge appearance.
The EPCO DP43-BL edge pull is specified for material thickness from 1/2 inch to 7/8 inch, which matches many standard cabinet doors and drawer fronts.
The EPCO DP43-BL pull uses #6 x 5/8 inch screws, which are sized to work with the specified 1/2 inch to 7/8 inch cabinet or drawer front thickness range.
The EPCO DP43-BL edge pull has an anodized satin black finish, which provides a uniform dark appearance to coordinate with other black decorative hardware.
The EPCO DP43-BL anodized satin black edge pull delivers a defined 1-7/8 inch (48 mm) center to center spacing, a 3-7/8 inch overall length, and back mounted attachment, which together provide predictable layout, clean edges, and a consistent black appearance on cabinet and furniture fronts.
Sold In: 1 Each