EPCO Edge Series oil rubbed bronze edge pull is a heavy duty pull designed for demanding cabinet and furniture applications where a stronger grip is needed. The pull is described as thicker and stronger, which supports use on doors or drawers that see frequent handling in busy environments. It is made of zinc, so the base metal provides a solid feel that stands up to repeated use on working cabinetry. The oil rubbed bronze finish delivers a dark, traditional look that helps this pull blend into many wood tones and decorative styles on built-ins and casework. A 2mm material thickness gives the pull added rigidity, which helps reduce flex when the front is pulled hard. With its Edge Series design and defined dimensions, this EPCO pull fits projects that call for a compact yet substantial edge-mounted grip.
This EPCO DP44-ORB pull has a width of 50mm, giving a compact span that suits smaller fronts while still providing enough edge length for a full finger grip. The projection is 37mm, so the pull stands off the surface far enough to clear typical fingers without needing a deep recess, which eases layout on thin doors or drawer faces. Height is listed as 35mm, defining how much room the pull occupies along the edge and helping align it with nearby hardware or panel reveals. With these defined dimensions and its edge style, the pull supports straightforward mark-out and drilling when planning consistent placement across a run of cabinets or furniture pieces.
The EPCO heavy duty edge pull DP44-ORB works well on cabinet doors, drawers, and similar panels where an edge-mounted grip is preferred over a protruding handle. Its 50mm width lets it sit neatly on narrow rails or stile edges without crowding adjacent hardware, which helps maintain clean lines on modern or traditional layouts. With 37mm projection, the pull stands off the face enough to give a firm handhold on doors that may seal tightly or carry interior loads. The 35mm height dimension defines the edge footprint, so it can be positioned to align visually with other pulls in a run of cabinets. Because it is made of zinc with an oil rubbed bronze appearance, it suits decorative hardware projects that need a darker metal tone while still relying on a solid-feeling pull.
The DP44-ORB design uses four larger, countersunk screws, which allows the pull to draw tightly to the surface and stay stable over time as doors and drawers are used. The countersunk feature lets the screw heads sit below the pull surface, maintaining a smooth touch area when fingers wrap underneath the edge. Its 2mm material thickness adds stiffness, so once installed with the specified four-point screw pattern, the pull resists flexing when force is applied at the outer edge. The defined width, height, and projection - 50mm, 35mm, and 37mm - give clear reference points for setting up jigs or repeated drilling patterns when multiple cabinets need the same hardware layout. Being part of the EPCO Edge Series helps identify it quickly in a hardware schedule as an edge-style pull with an oil rubbed bronze look, which supports consistent selection across a project.
The EPCO DP44-ORB edge pull is a heavy duty pull for cabinet or furniture fronts, providing a compact edge grip where a thicker and stronger handle is preferred.
The 50mm width and 35mm height define the pull footprint, helping position it on rails, stiles, or drawer edges for consistent alignment across multiple fronts.
The 37mm projection sets how far the pull stands off the surface, giving enough finger clearance for a solid grip without needing deep cutouts.
The 2mm material thickness increases stiffness, so the pull resists bending when users pull firmly on cabinet or furniture fronts.
Four larger countersunk screws let the pull seat flush and distribute load across more points, helping it feel solid and stay stable under repeated use.
The zinc construction provides a solid metal base, while the oil rubbed bronze description defines a darker decorative appearance for coordinated hardware projects.
The EPCO Edge Series oil rubbed bronze edge pull DP44-ORB offers a heavy duty zinc construction, 2mm material thickness, and four larger countersunk screw points that support a solid feel on working cabinetry. Its defined 50mm width, 37mm projection, and 35mm height give clear layout dimensions for repeatable installation on cabinet doors, drawers, and similar panels. For projects needing a compact, edge-mounted pull with an oil rubbed bronze look and specified measurements, this DP44-ORB model from Wurth Baer Supply aligns well with detailed hardware schedules.
Sold In: 1 Each