EPCO Edge Series Satin Nickel Edge Pull gives you a thicker and stronger pull made for demanding cabinet and furniture fronts. This EPCO pull is part of the Edge Series, so it mounts at the edge to provide a low-profile gripping point that stays close to the surface, which helps when fronts need to clear adjacent components. The heavy duty construction described in the SAP and web descriptions means the pull is built to handle frequent use in busy environments. A satin nickel finish ties into modern and transitional projects, so it works where a clean, neutral metal look is required. The pull is classified under Decorative Hardware & Moldings in Handles and Pulls, placing it in the category installers expect for functional door and drawer hardware. Being sold as Each lets you order the exact quantity needed for a specific run of cabinets.
The stated width of 50mm sets the horizontal span at the edge, which helps when laying out pulls so they land comfortably on narrow or wider fronts. A projection of 37mm places the pull far enough off the surface to grip by fingertips, while still remaining compact near nearby faces. The 35mm height defines how much of the pull presents along the edge, which matters when aligning with door rails or drawer fronts, especially where multiple pulls need to sit on the same visual line. Together, these dimensions help installers plan drilling and layout so the pulls line up evenly across a bank of cabinets.
This EPCO Edge Series Satin Nickel Edge Pull sits in the Decorative Hardware & Moldings category under Handles and Pulls, so it is intended for cabinet and furniture applications where a functional grip is needed at the front edge. The 50mm width works well across many standard cabinet doors and drawer fronts, giving enough span for a comfortable pull point without dominating the panel. With 37mm projection, fingers can hook the pull easily on doors above counters or drawers below work surfaces. The 35mm height allows the pull to sit along an edge without covering too much of the face, which helps on smaller fronts. Satin nickel finish makes it suitable for projects pairing with other satin nickel handles and pulls from EPCO or similar decorative lines.
The description thicker and stronger with 4 larger, countersunk screws signals a pull built for higher duty cycles, which is valuable on cabinets that see frequent opening throughout the day. Larger countersunk screw heads seat cleanly in the pull body, so the fasteners sit flush and help spread forces across the zinc material. The 2mm material thickness gives the DP44-SN a solid feel in hand, which helps the pull resist bending at the edge when users pull at different angles. Made of zinc, the pull provides a consistent base for the satin nickel finish, supporting a uniform appearance across multiple units in the same room. The manufacturer part number DP44-SN clearly identifies this exact configuration, simplifying reorders or matching existing installations where the same satin nickel edge pull is already in use.
The EPCO Edge Series Satin Nickel Edge Pull has a width of 50mm, which provides a compact span at the door or drawer edge while still giving enough surface for a comfortable grip.
The pull has a projection of 37mm, so it stands off the cabinet surface enough for fingertips to catch the edge pull comfortably without extending excessively into the workspace.
The EPCO DP44-SN pull has a height of 35mm, giving a modest edge presence that lines up well with rails or drawer fronts while keeping the pull visually compact.
The pull uses 2mm material thickness, which creates a sturdier edge profile that resists flexing when doors or drawers are pulled open repeatedly.
The EPCO Edge Series Satin Nickel Edge Pull is made of zinc, providing a solid base metal for the satin nickel finish and a consistent feel across multiple pulls.
The pull is described as thicker and stronger with 4 larger, countersunk screws, indicating a heavy duty configuration suited to frequent cabinet use.
The EPCO Edge Series Satin Nickel Edge Pull, identified as DP44-SN, offers a heavy duty configuration with 2mm thick zinc material for a solid feel. With 50mm width, 37mm projection, and 35mm height, its dimensions suit many cabinet and furniture fronts where a compact, satin nickel edge pull is needed. For projects that call for decorative hardware in satin nickel within the Handles and Pulls category, this EPCO edge pull aligns form, finish, and size in a straightforward, job-ready option.
Sold In: 1 Each