Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center pull uses a 3 inch (76 mm) screw spread so the handle sets over a standard small cabinet drilling layout, which helps keep hole location consistent across doors and drawer fronts. The anodized satin brass finish gives the aluminum pull a satin brass look while using aluminum as the base metal, which keeps the pull light while providing a brass-colored appearance on cabinet faces. The overall length of 3-7/8 inch keeps the handle compact around the mounting holes, which works well on narrow rails or smaller drawer fronts where space is tight. This pull is classified as a handle and pull within decorative hardware, so it fits typical cabinet and furniture handle roles in a woodworking shop or installation workflow. The EPCO DP46-2-B part number ties this specific size and finish together for repeat ordering or matching across a job.
The flush mortise mounting design on this EPCO pull means the body of the handle is set into a cutout rather than resting only on the surface, which creates a low profile look on cabinet doors and drawers. The pull is specified for material thickness of 13/16 inch, so the intended installation is into door or drawer fronts of that thickness where the mortise depth and handle projection are balanced. With a 3 inch center to center dimension, drill spacing aligns to the mortised area while using a familiar 3 inch pattern that many installers use on small cabinets. The overall length of 3-7/8 inch leaves limited overhang beyond the screw holes, which can be important when fitting the pull into a routed pocket close to panel edges.
This EPCO pull is identified in decorative hardware and moldings under handles and pulls, which places it in typical cabinet and furniture handle applications in a woodworking setting. The 3 inch center to center measurement sets it up well for small to mid-size doors, where that spacing offers enough grip without taking over the panel. Because the pull is described for material thickness of 13/16 inch, it lines up with many cabinet doors and drawer fronts built from that stock thickness, keeping the mortise, grip, and screw path suited to that material. The flush mortise mounting requirement means the door or drawer front receives a routed or cut pocket to seat the pull, giving a cleaner face where the handle does not project as far as a surface-mount version. The overall length of 3-7/8 inch fits comfortably on narrower rails, which lets installers place the pull without running into frame joints on smaller fronts. The anodized satin brass description provides a satin brass appearance that can match other satin brass decorative hardware in the same project when coordinating finishes by description.
The 3 inch center to center dimension on this EPCO DP46-2-B pull is a fixed drilling distance that supports repetitive layout when using jigs, which saves setup time across large runs of cabinets or drawer banks. With an overall length of 3-7/8 inch, the pull keeps a predictable amount of material beyond each screw location, which helps when laying out mortises close to door or drawer edges. The specification for material thickness of 13/16 inch points to an intended panel thickness, so routing depth and screw travel can be planned around that thickness in shop workflows. The flush mortise mounting style calls for a consistent recess for each handle, which can be integrated into machining steps for doors and drawers in a production sequence. The anodized satin brass description signals a satin brass look on aluminum construction, allowing designers and builders to reference that color description when standardizing finish choices on a project using EPCO decorative hardware.
This EPCO pull has a 3 inch (76 mm) center to center dimension, which sets the hole spacing for drilling and aligns with common small cabinet pull layouts.
The DP46-2-B pull has an overall length of 3-7/8 inch, so it stays compact on the door or drawer face while still spanning the 3 inch hole pattern.
This EPCO pull is described for material thickness of 13/16 inch, which aligns with many cabinet doors and drawer fronts used in woodworking projects.
The flush mortise mounting design requires setting the pull into a mortised recess, allowing the handle to sit low on the surface for a streamlined appearance.
The anodized satin brass description indicates a satin brass appearance on an aluminum pull, giving cabinets a brass-toned look while using aluminum construction.
This EPCO pull is identified by manufacturer part number DP46-2-B, which ties the specific 3 inch center to center size and anodized satin brass description together.
This EPCO DP46-2-B pull combines a 3 inch center to center layout, 3-7/8 inch overall length, and flush mortise mounting, which suits small cabinet doors and drawers using 13/16 inch material. The anodized satin brass description provides a satin brass appearance on an aluminum pull, supporting projects that call for that finish description in decorative hardware. For cabinet work built around a 3 inch drilling pattern and flush mortised handles, this pull offers a defined size, finish description, and material thickness target to match across multiple fronts.
Sold In: 1 Each