
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO aluminum pull 3 inch center to center gives you a compact gripping point that matches common small cabinet door and drawer layouts. The SAP description specifies it as an aluminum pull for 13/16 inch thick material, so it is sized for that stock thickness in cabinet or panel construction. The web description notes a 3 inch center to center dimension with a 3-7/8 inch overall length, which sets consistent handle spacing while leaving enough body length for a comfortable grasp. The pull uses a flush mortise mounting design, letting it sit recessed into the panel instead of projecting fully off the surface, which helps reduce snag points on tight runs. The finish is identified as anodized oil rubbed bronze, giving the aluminum pull a darker decorative appearance that coordinates with oil rubbed bronze design schemes while still using a lightweight base metal.
The web description states that this pull uses flush mortise mounting, meaning the body of the pull sits into a routed or machined pocket in the 13/16 inch thick material instead of standing entirely proud of the surface. This style helps create a low-profile grip that is useful where doors pass close to walls or adjacent fronts. The description also notes that the pull is fastened using #6 x 5/8 inch screws, so the mounting is screw-based, giving a mechanical connection through the material. With a 3 inch center to center layout, installers can drill or route using common jigs for that spacing and then form the mortise to accept the body, tying the dimensions and mounting method directly into a straightforward workflow.
The SAP description labels this item as an aluminum pull for 13/16 inch thick material, so it is oriented toward cabinet doors and drawer fronts milled to that standard thickness. The flush mortise mounting called out in the web description means the pull is designed to recess into the face of the panel, which makes it well-suited for situations where projecting knobs or handles could interfere with adjacent fronts. The 3 inch center to center dimension ties directly to a common handle drill pattern used on many small doors and drawers, giving installers a familiar layout when replacing hardware or outfitting new cabinets. With a 3-7/8 inch overall length, the pull body extends beyond the screw locations slightly, giving enough gripping surface while still fitting comfortably on narrow rail or stile widths.
The manufacturer part number DP46-2-ORB identifies this specific combination of design and finish, so repeat orders can match previous installations without dimension changes. The web description confirms that center to center is 3 inch and overall length is 3-7/8 inch, which allows installers to plan drilling and mortising jigs for repeatable production runs. The anodized oil rubbed bronze finish described in the product name provides a darker bronze appearance on the aluminum substrate, supporting visual consistency across multiple pulls installed in the same room. Because the pull mounts with flush mortise construction in 13/16 inch material, the relationship between mortise depth and panel thickness is built into the design, which helps keep the gripping edge aligned to the surface for a clean, even presentation across a cabinet bank.
The DP46-2-ORB pull has a 3 inch center to center spacing and a 3-7/8 inch overall length, so drill locations and visible handle length are clearly defined for cabinet layouts.
The flush mortise mounting requires a recess in the 13/16 inch material so the pull sits nearly level with the surface, which reduces projection and helps in tight clearances.
This EPCO aluminum pull is described for material thickness of 13/16 inch, so its proportions and mounting depth are tuned for doors or drawer fronts made to that thickness.
The SAP description notes an aluminum pull, and the product name specifies an anodized oil rubbed bronze finish, combining a lightweight metal body with a dark decorative surface appearance.
The 3 inch center to center spacing matches a common handle pattern, so jigs and drilling setups can be standardized across multiple doors and drawers in a project.
The DP46-2-ORB manufacturer part number designates this specific EPCO aluminum pull with its 3 inch center to center sizing, flush mortise style, and anodized oil rubbed bronze finish.
The EPCO aluminum pull 3 inch center to center layout, 3-7/8 inch overall length, and aluminum body provide a compact, lightweight option for cabinet fronts. The designation for 13/16 inch thick material and the flush mortise mounting support low-profile installs on standard cabinet doors and drawers. The anodized oil rubbed bronze finish ties the pull into darker decorative schemes while staying within the EPCO handles and pulls family. For cabinet projects needing a recessed grip with known drilling dimensions and a defined finish and part number, this DP46-2-ORB pull offers a clearly specified option ready to integrate into planned layouts.
Sold In: 1 Each