Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center pull is a satin brass handle designed for decorative cabinet and furniture applications where a compact, consistent grip is needed across doors and drawers. The center to center dimension of 3 inches sets a precise drill pattern, so hole spacing stays uniform from cabinet to cabinet. The overall length of 3-7/8 inches keeps the pull visually balanced around the fastener points, which helps layouts look even on narrower fronts. The pull is described as an alum pull in the SAP description, indicating an aluminum construction that keeps weight low while still delivering a solid hand feel in regular use. The anodized satin brass finish creates a muted brass tone on the aluminum body, which supports projects that call for a warm metallic look without a high-gloss surface. The manufacturer part number DP46-B identifies this exact EPCO pull for reorders or matching hardware on future work.
The description states this EPCO pull is for material thickness of 13/16 inch, so it is sized for fronts in that range, helping the grip feel properly centered and proportioned on typical cabinet panels. The reference to alum pull for 3/4 inch thick in the SAP description signals intent for use on panels around that thickness band, which supports consistent fit across standard cabinetry builds. Flush mortise mounting is specified, so the body of the pull is set into a shallow recess, letting the pull sit level with the surrounding surface and creating a cleaner transition where fingers meet the handle. That flush mortise mounting style keeps the pull from projecting excessively off the face, which can matter on tight-clearance doors or near adjacent walls and appliances. Mounting with a flush mortise also provides a defined seat for the pull, supporting stable placement over time.
This EPCO 3 inch center to center pull fits decorative cabinet and furniture projects where a 3 inch drilling pattern is already established or preferred, so it can align with common layouts in kitchens, baths, and built-ins. The 3-7/8 inch overall length suits door and drawer faces that need a modestly sized handle, keeping the hardware presence controlled without disappearing visually. The pull is positioned in the Decorative Hardware & Moldings Handles and Pulls category, which places it among standard cabinet handles used in woodworking environments. An anodized satin brass finish pairs well with projects aiming for a brass-toned hardware line, so installers can coordinate this piece with other satin brass elements in the same space. Because it is noted as an alum pull for 3/4 inch thick material, it supports use on typical cabinet fronts built to that thickness, keeping the handle proportion in line with common shop practices.
The 3 inch center to center measurement gives a fixed reference for boring or drilling, so jigs and templates can be set once and repeated, which reduces layout time and limits rework on door and drawer fronts. The 3-7/8 inch overall length means the handle overhang beyond the mounting holes is known, which helps when positioning the pull relative to panel edges or neighboring hardware. The specification calling out material thickness of 13/16 inch guides placement on fronts in that range, helping the installer keep the pull centered and visually balanced across a bank of cabinets. Flush mortise mounting lets the body nest into a cutout, which supports a stable mechanical seat and creates a defined edge for alignment during installation. Identifying the part as DP46-B from EPCO allows consistent selection of the same pull whenever projects call for matching satin brass hardware, simplifying future service or additions.
The EPCO DP46-B pull uses a 3 inch center to center dimension, which sets the exact hole spacing for drilling and helps keep handle alignment consistent across doors and drawers.
The EPCO anodized satin brass pull has an overall length of 3-7/8 inches, so it stays compact on smaller fronts while still providing enough grip area for everyday cabinet use.
This EPCO pull is described for material thickness of 13/16 inch and as an alum pull for 3/4 inch thick, aligning it with common cabinet door and drawer front constructions.
The flush mortise mounting means the pull seats into a recess, so the handle sits level with the surface and has a defined pocket for accurate placement during cabinet installation.
The EPCO DP46-B cabinet pull has an anodized satin brass finish, providing a brass-toned appearance with a smoother, lower-sheen surface suitable for decorative cabinetry.
The DP46-B part number uniquely identifies this EPCO 3 inch center to center anodized satin brass pull, simplifying reorders and matching hardware across multiple projects.
The EPCO 3 inch center to center pull with 3-7/8 inch overall length gives installers a defined footprint for cabinet doors and drawers that call for satin brass hardware. With anodized satin brass finish, aluminum construction noted in the description, and flush mortise mounting, it offers a specific combination of size, material, and installation style that fits many 13/16 inch and 3/4 inch front applications. When a project specification lists DP46-B or requires consistent satin brass pulls in this size range, selecting this model keeps drilling patterns, visual balance, and finish tone aligned across the job.
Sold In: 1 Each