Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 72 inch aluminum pull provides a continuous 6 foot gripping edge for doors or panels, so long cabinet or fixture runs have a single, uninterrupted handle line. The pull is designed for flush mortise mounting, so it sits into the edge instead of on top, which keeps fronts flat while still giving a defined grip area. Its unfin alum construction gives a bare aluminum surface, so finishing or matching to surrounding hardware can be handled as the project requires. The pull is specified for material thickness of 3/4 inch, so it lines up with common cabinet and panel stock without awkward overhangs. With no holes or screws pre-drilled, the DP46-L-M lets installers choose drilling locations and fastening methods that suit their own fabrication sequence and jig setup.
The EPCO DP46-L-M aluminum pull is built for flush mortise mounting in 3/4 inch thick material, so the body of the pull nests into the edge and leaves the face surface clear. This mounting approach helps align the pull with standard panel thicknesses, making layout more straightforward on cabinet doors, drawer fronts, or tall panels built from typical 3/4 inch stock. Because the pull is 6 feet in length, a single mortise run can serve an entire tall door or wide panel, simplifying layout of the cut. The no holes/no screws configuration means drilling patterns for fastening can be matched to the mortise location and any internal framing behind the 3/4 inch material.
The EPCO 72 inch aluminum pull works with material thickness of 3/4 inch, so it suits many cabinet doors, casework panels, and similar components built from standard sheet goods. Its 6' continuous length lets it span tall pantry-style doors or long horizontal runs where a single pull is preferred. Because it mounts in a flush mortise, the pull integrates into the edge of the 3/4 inch material rather than projecting off the face, which supports clean-lined designs and minimizes obstructions on front surfaces. The unfin alum surface allows the same base part to be used across different jobs, since finishing can be matched to each project as needed without changing the core pull profile.
The DP46-L-M aluminum pull uses a no holes/no screws configuration, which leaves the installer in control of hole placement so fasteners can tie into framing members or specific backer locations behind the 3/4 inch material. The flush mortise mounting style means the grip profile is defined by the mortise depth and location, helping maintain consistent reveal and edge alignment along the full 6 foot length. Because the pull is a single 72 inch piece, there are fewer joints to align, which can reduce time spent matching heights or gaps between multiple pulls on the same door or panel. The unfin alum construction also supports consistent geometry from piece to piece, so once a mortise and drilling setup is dialed in for DP46-L-M, the same process can be repeated across similar runs.
The EPCO DP46-L-M pull has a length: 6' and is also identified as 72 inches or 1829 mm, so it can span tall or wide 3/4 inch panels in a single run.
The DP46-L-M uses flush mortise mounting, so it is set into the edge of the material thickness of 3/4 inch, keeping the panel face surface flat while providing a grip.
The EPCO 72 inch aluminum pull is designed for material thickness of 3/4 inch, so it aligns with common cabinet doors and panels made from standard 3/4 inch stock.
The SAP description lists UNFIN ALUM PULL, indicating the DP46-L-M has an unfin alum surface suitable for projects needing bare aluminum or later finishing steps.
The web description notes no holes/no screws, so the DP46-L-M pull does not have pre-drilled mounting holes and allows custom hole placement during fabrication.
The web description states Packing & Sold In: Each., so the DP46-L-M aluminum pull is ordered as individual 6 foot pieces.
The EPCO DP46-L-M unfin alum pull combines a 6' length: 6' profile with flush mortise mounting for material thickness of 3/4 inch, giving cabinet and casework projects a continuous grip option. With no holes/no screws specified, it supports shop-specific drilling and fastening layouts. For work that needs a single 72 inch aluminum edge pull that can be finished or left as bare metal, this EPCO handle and pull format aligns well with standard cabinet materials and long-panel applications.
Sold In: 1 Each