Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center pull provides a defined 3 inch (76 mm) mounting span, which sets hole locations accurately so cabinet doors and drawers line up consistently across a run. The 3-7/8 inch overall length gives extra finger clearance beyond the mounting points, which helps when opening heavier fronts without knuckle rub against the surface. An anodized oil rubbed bronze finish combines an oil rubbed bronze appearance with the surface qualities of anodizing, so the pull delivers that darker decorative look while maintaining an engineered metal treatment. The pull is designed for material thickness of 3/4 inch, so it suits standard cabinet door and drawer front construction and keeps the grip centered over typical face thickness. As part of EPCO handles and pulls, the DP46-ORB model identifies a specific size and finish, which simplifies matching existing hardware across a shop or job.
The flush mortise mounting design places the EPCO DP46-ORB pull into a recess in the cabinet material, so the base of the pull sits level with the surface and minimizes projection at the contact area. This style can help when fronts need to stay relatively flat, such as on cabinets that open near walls or adjacent fixtures. Center to center: 3 inch spacing defines the distance between the two mounting points, which guides drilling jigs or templates and helps repeat placement accurately from door to door. The pull is specified for material thickness of 3/4 inch, aligning with common cabinet construction so the grip locates correctly over the panel face.
This EPCO 3 inch center to center pull is designed for material thickness of 3/4 inch, so it suits standard cabinet doors and drawer fronts that use that common stock size. In practice, that thickness specification keeps the installed pull positioned properly relative to the outer surface, which supports a comfortable hand grip while operating doors and drawers. The 3-7/8 inch overall length also defines how much space the pull occupies on the front, which matters when laying out pulls on narrow rails or smaller drawer faces. Because the pull is part of the decorative hardware and moldings handles and pulls category, it is intended for visible cabinet locations where appearance as well as function are important across a room of matching fronts.
The clearly stated 3 inch (76 mm) center to center dimension on the DP46-ORB pull allows installers to use fixed jigs or measurements, which streamlines drilling and keeps hardware aligned from cabinet to cabinet on larger jobs. The 3-7/8 inch overall length works as a reference when checking edge distances, so pulls can be placed with consistent margins from door edges and between adjacent fronts. Anodized oil rubbed bronze finish gives a uniform finish specification, which helps when ordering multiple pulls so the visual tone stays consistent across all faces. Flush mortise mounting directs the installer to cut a matching recess, which helps seat the pull firmly and keeps the front surface profile tight while still allowing easy gripping at the handle.
The EPCO DP46-ORB pull has a 3 inch (76 mm) center to center dimension, which sets the spacing between mounting points for layout and drilling.
The pull has an overall length of 3-7/8 inch, which defines the space it covers on the cabinet face and helps with clearance checks.
The EPCO DP46-ORB pull is specified for material thickness of 3/4 inch, matching typical cabinet doors and drawer fronts for proper fit.
The pull uses flush mortise mounting, so it installs into a recess in the material and keeps the pull base level with the surface.
The DP46-ORB pull has an anodized oil rubbed bronze finish, giving an oil rubbed bronze look over an anodized treatment for consistent appearance.
This pull is identified as EPCO DP46-ORB, which ties to the specific 3 inch center to center, 3-7/8 inch overall length, and anodized oil rubbed bronze finish.
The EPCO 3 inch center to center pull with 3-7/8 inch overall length offers defined mounting dimensions for cabinet work that uses standard 3 inch spacing. With anodized oil rubbed bronze finish, flush mortise mounting, and a design intended for 3/4 inch material thickness, it provides clear, repeatable specs for planning layouts, drilling, and matching hardware across multiple fronts.
Sold In: 1 Each