Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives a low-profile grip that mounts at the door edge, so doors stay visually clear while still opening comfortably. The oil rubbed bronze finish provides a dark, understated look that sits well on decorative woodworking projects where a visible handle is not desired. This EPCO pull is a 3 inch (76 mm) center to center design, which fits common small-door layouts in cabinetry and similar casework. The aluminum construction keeps the pull light while still giving a defined edge to catch with fingers during everyday use. With an overall length of 100mm, the pull spans enough of the edge to feel secure in hand without crowding narrow door widths. The part number DP47-ORB-100 identifies this specific oil rubbed bronze, edge-style model so it can be called out consistently on drawings and material lists.
This EPCO aluminum edge pull follows a 3 inch (76 mm) center to center hole spacing, so drilling can follow straightforward measurements when laying out multiple doors. The 100mm overall length means the pull extends slightly beyond the mounting points, giving a defined lip along the door edge once it is fixed in place. Because it is back mounted, the pull secures from the rear face of the material, keeping the front edge surface free of visible fastener heads. The design suits material thickness from 1/2 inch to 7/8 inch, which covers many cabinet doors and drawer fronts. Within that range, the grip area sits correctly along the edge, so users can reach it comfortably without the pull feeling either buried or overhung.
The EPCO Edge Series tab pull in oil rubbed bronze works on cabinet and similar doors built from stock between 1/2 inch and 7/8 inch thick, because the geometry is sized around that thickness range. On these doors, the pull mounts at the edge so the face remains free for uninterrupted panel design or molding details. The 3 inch (76 mm) center to center dimension aligns with compact door widths commonly found in upper cabinets and small base units, letting hardware lines stay consistent across a project. Its 100mm overall length gives enough projection along the edge to feel natural when opening doors that are reached from different angles. The oil rubbed bronze finish suits builds where darker decorative hardware is preferred on woodworking surfaces.
The defined 3 inch (76 mm) center to center spacing on this EPCO aluminum edge pull allows installers to repeat a single drilling template across a bank of doors, which can speed layout and maintain alignment. The 100mm overall length means the pull has a predictable footprint along the edge, helping designers position multiple pulls so they line up neatly in elevation views. Because the pull is engineered for 1/2 inch to 7/8 inch thick material, its back mounted installation places the gripping edge in a consistent relation to the door face, which supports uniform user feel across different cabinet sections. The oil rubbed bronze finish ties all pulls of this DP47-ORB-100 model to the same visual standard, so replacement or expansion work can follow the original appearance without introducing mismatched hardware. The back mounted configuration also keeps the working edge visually clean, which can be important where the cabinet design emphasizes the panel or veneer rather than the hardware.
This EPCO Edge Series tab pull has a 3 inch (76 mm) center to center dimension, which matches a common drilling pattern for smaller cabinet doors and keeps hardware layout consistent.
The DP47-ORB-100 edge pull is 100mm in overall length, giving extra grip area beyond the mounting holes while still fitting typical cabinet door widths.
This EPCO aluminum edge pull is designed for material thickness from 1/2 inch to 7/8 inch, so it seats correctly on many standard cabinet doors and drawer fronts.
The EPCO Edge Series tab pull uses a back mounted design, so it fastens from the rear of the panel and leaves the front edge clean for a minimalist appearance.
This pull has an oil rubbed bronze finish, which provides a dark, muted look that blends into many decorative woodworking and cabinet styles.
The DP47-ORB-100 part number identifies this specific EPCO oil rubbed bronze edge pull, helping specifiers and installers call out and reorder the exact same model.
The EPCO Edge Series tab pull in oil rubbed bronze combines a 3 inch (76 mm) center to center layout with a 100mm overall length, so it suits compact cabinet doors that still need a defined grip edge. Its back mounted, aluminum design is sized for material from 1/2 inch to 7/8 inch thick, keeping the working edge comfortable on many common door and drawer fronts. When a project calls for darker, low-visibility hardware along the edge rather than on the face, this DP47-ORB-100 pull offers a clearly defined specification you can apply across matching runs.
Sold In: 1 Each