Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO edge pull gives a low-profile grip point at the edge of a door or drawer, so cabinets open with a simple finger pull instead of a full handle. The 1-7/16 inch center to center dimension sets the mounting hole spacing, which guides drilling layout for repeatable installations across multiple fronts. Overall length of 2 inches keeps the pull compact, which matters when working on tight face frames or narrow drawer fronts. The 1-1/2 inch projection sets how far the pull stands off the surface, creating a space to grab without crowding adjacent doors or walls. Construction in zinc provides a solid metal body, which supports everyday cabinet use in shops, kitchens, or built-ins. The oil rubbed bronze finish establishes a dark, traditional look, which helps this pull coordinate with other bronze hardware on the same project.
The 1-7/16 inch center to center measurement on this EPCO edge pull defines the exact distance between mounting points, which lets installers plan drilling from cabinet edges or reference lines with confidence. With a 2 inch overall length, the pull stays within the rail or stile on many cabinet designs, which simplifies positioning while keeping the grip near the door edge. The 1-1/2 inch projection controls how far the pull extends toward the user, which affects clearance near adjacent cabinets or appliances. Using these three linked dimensions together helps set hole locations, edge setbacks, and alignment from piece to piece on a run of doors or drawers.
The EPCO DP48-ORB edge pull is sized for cabinets where a compact grip at the edge is preferred, because its 2 inch length keeps it close to the door or drawer corner. The 1-7/16 inch center to center spacing works well on narrow rails or stiles, since it leaves some material above and below the mounting points on many standard-width frames. With a 1-1/2 inch projection, the pull extends enough to create a usable finger space, which suits typical kitchen, bath, or shop cabinet depths. The oil rubbed bronze finish lets this pull sit alongside other decorative hardware and moldings, supporting projects that use matching bronze handles and pulls from EPCO or similar lines.
The defined 1-7/16 inch center to center dimension on this EPCO edge pull allows installers to standardize drill jigs or templates, which helps maintain consistent spacing across large cabinet runs. Its 2 inch overall length sets a predictable distance from the top edge of a drawer or door to the end of the pull, which simplifies visual alignment from front to front. The 1-1/2 inch projection creates a fixed stand-off from the cabinet face, which helps keep user fingers away from finished surfaces during operation. Constructed from zinc, the pull gives a solid feel in hand, which supports repeated daily use on residential or commercial cabinetry. The oil rubbed bronze finish ties these practical details into a coordinated visual choice, which matters when hardware appearance needs to match other oil rubbed bronze elements specified on the job.
The EPCO edge pull has a 1-7/16 inch center to center dimension, which sets the distance between mounting holes for drilling and layout on cabinet doors or drawers.
The DP48-ORB edge pull is 2 inches long, which keeps it compact for use near cabinet edges or on narrow rails while still providing a defined grip area.
This oil rubbed bronze edge pull has a 1-1/2 inch projection, which determines how far it stands off the cabinet face to create finger clearance for opening.
The EPCO cabinet edge pull is made of zinc, which provides a metal body suitable for everyday opening and closing of cabinet doors and drawers.
The DP48-ORB EPCO pull has an oil rubbed bronze finish, which delivers a dark, traditional appearance that coordinates with other oil rubbed bronze hardware.
The 1-7/16 inch center to center size lets installers set drill spacing accurately, which supports consistent placement of the pull across multiple cabinet fronts.
The EPCO edge pull in oil rubbed bronze combines a 1-7/16 inch center to center layout, 2 inch overall length, and 1-1/2 inch projection, so cabinet openings feel consistent from one front to the next. Using this zinc EPCO DP48-ORB pull on a run of doors or drawers keeps mounting dimensions and appearance aligned, which supports clean lines on finished work. For projects calling for an oil rubbed bronze cabinet pull that stays close to the edge, this center to center and length combination provides a practical fit.
Sold In: 1 Each