Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sliding door knobs with screws from EPCO give a low-profile grip point on sliding door hardware where a flush, simple pull is needed. The aluminum construction provides a light yet solid feel for frequent operation on sliding door systems. The satin brass anodized finish delivers a brass look that coordinates with other brass-toned hardware while maintaining a consistent surface appearance over time. The 33/64 inch diameter creates a compact pull that stays out of the way of adjacent doors and trim. A 1/2 inch projection keeps the knob easy to grasp while holding the pull close to the door face for a clean, tight-line installation. The design is ideal for mounting to the sliding door shoe identified as part number 743, so it fits directly into that established EPCO sliding door setup.
The EPCO GP19-B sliding door knobs are designed for mounting to a sliding door shoe noted as part number 743, so the knob aligns with that specific hardware point on the door. The knob uses #6-32 threaded fasteners, with one screw identified as #6-32 x 3/4 inch and another as 6-32 x 5/8 inch, giving options for different material thicknesses at the mounting location. Using these defined screw sizes keeps the knob properly seated on the shoe or door surface and supports a firm attachment point. The 1/2 inch projection from the mounting surface keeps the grip accessible without pushing the pull too far into the opening, which helps maintain clear travel paths for sliding panels.
The EPCO sliding door knobs with screws are described as ideal for mounting to a sliding door shoe identified as part number 743, so they are intended to pair directly with that shoe component in a sliding system. When used with the sliding door shoe, the 33/64 inch diameter head sits at a controlled location on the stile, providing a consistent pull point from door to door across a run. The aluminum construction keeps the load on the shoe light, which is beneficial when multiple doors share overhead or track hardware. The satin brass anodized finish presents a uniform appearance on the visible face of the door, helping installations where matching hardware color along the track is part of the design requirement. The 1/2 inch projection creates an accessible grip that still respects the door-to-door spacing used with many sliding assemblies.
The EPCO GP19-B knobs work with #6-32 threaded fasteners in two lengths, with one screw at #6-32 x 3/4 inch and another at 6-32 x 5/8 inch. These defined thread and length details allow the installer to match the fastener depth to the door or shoe thickness, supporting a solid mount without excessive screw extension. The use of #6-32 machine threads also fits common tapped holes and metal components in sliding door hardware, which can streamline installation across multiple openings. A rubber bumper is part of the described set, giving a resilient contact point where the door meets another surface and helping reduce direct metal or wood impact at that location. In combination, the specific screw sizes, aluminum knob body, and bumper provide a predictable pull point and stop behavior across repeated sliding door builds using the same hardware group.
The EPCO GP19-B sliding door knob has a 33/64 inch diameter, which creates a compact pull area suitable for narrow door stiles and tight sliding door layouts.
The EPCO sliding door knob has a 1/2 inch projection, providing enough grip for fingers while keeping the pull close to the door face to maintain clearance between sliding panels.
The GP19-B knobs are made from aluminum with a satin brass anodized finish, combining a lightweight metal body with a brass-colored appearance on the exposed surface.
These EPCO knobs are described as ideal for mounting to the sliding door shoe identified as part number 743, creating a defined pull point within that hardware setup.
The EPCO GP19-B knob uses #6-32 threaded screws, with one identified as #6-32 x 3/4 inch and another as 6-32 x 5/8 inch, matching typical sliding door hardware mounting needs.
The 1/2 inch projection keeps the knob easy to grasp while limiting how far it extends into the opening, which supports smooth sliding movement alongside adjacent doors.
The EPCO GP19-B sliding door knobs with screws combine a 33/64 inch diameter, 1/2 inch projection, and satin brass anodized aluminum body to support compact sliding door pulls. With #6-32 threaded screw sizing and a design described as ideal for mounting to the sliding door shoe part number 743, these knobs align with established EPCO sliding door layouts. Use this knob style when a small, brass-toned aluminum pull is required on sliding door installations that reference EPCO hardware and the GP19-B part number in the hardware schedule.
Sold In: 1 Pair