Sliding door knobs with screws from EPCO provide a compact pull point on sliding door hardware where a full handle is not required, so doors can be moved smoothly using a minimal mounting footprint. The 15/32 inch diameter knob creates a small, defined grip area on the sliding door face, helping keep hardware layout tight around tracks and frames. A 3/4 inch projection sets the knob off the door surface enough for fingers to catch it cleanly, which supports easier operation on narrow stile or glass-adjacent doors. Satin clear anodized finish on the knob surface preserves the aluminum appearance, giving a neutral, jobsite-friendly look that pairs with a range of sliding door hardware finishes. The aluminum material keeps the knob light while still providing a solid contact point, useful where weight on the sliding assembly needs to stay low for smooth travel. EPCO GP20-A designation ties this knob directly to builders hardware and sliding door hardware applications.
The EPCO GP20-A sliding door knob uses threaded mounting with 6-32 screws, creating a familiar fastening method for door hardware work. One #6-32 x 3/4 inch screw and one 6-32 x 5/8 inch screw support mounting in different door or shoe thickness situations, which helps align the knob in the usable grip zone on the sliding panel. The knob is identified as ideal for mounting to sliding door shoe part 743, so it is intended to fasten directly into that component on the sliding door hardware assembly. Using a 6-32 thread pattern keeps this knob aligned with common door hardware fastener styles, which can simplify field adjustments or replacements when working across multiple sliding door openings.
The EPCO sliding door knobs with screws are designated as sliding door hardware, placing them directly in builders hardware and sliding door hardware applications. Their 15/32 inch diameter gives a compact profile that fits well on door shoe locations, especially where sliding panels pass close to jambs or side frames. The knob is described as ideal for mounting to sliding door shoe part 743, so its proportions and threading are aligned with that shoe design, letting the knob serve as the primary touch point at the lower or edge area of the sliding panel. With a 3/4 inch projection, the grip sits far enough off the surface to avoid knuckle contact with the door face, while still staying tight to the shoe so the sliding path remains clear. The satin clear anodized finish on the aluminum body creates a neutral hardware tone that blends into many track and shoe systems without drawing attention away from the overall sliding door layout.
The GP20-A part number identifies this EPCO knob specifically within sliding door hardware ranges, which helps keep replacements consistent across multiple doors on the same project. Aluminum construction limits added mass on the sliding panel, supporting smoother movement along the track by minimizing extra load at the shoe mounting point. The threaded 6-32 connection used with the #6-32 x 3/4 inch and 6-32 x 5/8 inch screws supports a secure fastening into the sliding door shoe part 743 or similar prepared points, which helps the knob stay stable under regular pulling force. A 3/4 inch projection also positions the hand slightly off the door plane, improving leverage and reducing the tendency to drag fingers against the surface as the door moves. Combined with the compact 15/32 inch diameter, these dimensions support repeatable, comfortable operation on sliding doors where space and clearance are tightly controlled.
The EPCO GP20-A sliding door knob has a diameter of 15/32 inch, which creates a compact pull point suited to tight sliding door layouts and narrow stile conditions.
The sliding door knob has a 3/4 inch projection, setting the grip away from the door face for easier finger access while maintaining a low-profile presence on the panel.
This EPCO knob is described as ideal for mounting to sliding door shoe part 743, pairing the grip directly with that shoe location on the sliding assembly.
The GP20-A knob is made from aluminum with a satin clear anodized finish, giving a light, neutral metal appearance suited to many sliding door hardware systems.
The knob uses one #6-32 x 3/4 inch screw and one 6-32 x 5/8 inch screw, supporting threaded mounting into sliding door shoes or prepared points using 6-32 fasteners.
The GP20-A knob is listed under builders hardware and sliding door hardware, aligning it with components used specifically for sliding door installations.
The EPCO sliding door knobs with screws, part GP20-A, combine a 15/32 inch diameter, 3/4 inch projection, and 6-32 threaded mounting to create a compact grip tailored to sliding door shoe part 743. Aluminum construction with satin clear anodized finish supports a neutral, light hardware profile on sliding panels. For projects using builders hardware in the sliding door hardware class, this knob configuration provides a defined pull point at the shoe, helping doors move smoothly while staying within tight clearance limits on the track and frame.
Sold In: 1 Pair