EPCO 96mm center to center pull gives a consistent 96 mm fixing spread, so cabinet doors and drawers line up uniformly across a run. The 3-3/4 inch center to center dimension matches common drilling patterns, so it suits standard layouts in residential or shop-built cabinetry. The pull is made from plastic, which keeps weight down on lighter doors and drawer fronts while still providing a defined gripping point. Its black finish creates a dark, uniform look that blends easily with many hinge and hardware choices. A projection of 1-1/4 inch spaces hands away from the cabinet face, which helps reduce knuckle contact with the door or drawer surface in everyday use. The EPCO brand and MC303-2-BL part number give a clear, repeatable reference for reorders or matching additional cabinets later.
The 96 mm center to center measurement defines the two mounting holes, so installers can set jigs or drilling templates for repeat cabinet runs. The 3-3/4 inch center to center size aligns with many existing fronts, which helps on change-out jobs where hole locations are already fixed. A projection of 1-1/4 inch provides hand clearance from the surface, which affects how far the pull sits off the door or drawer in tight reveals. The #8 x 1-1/8 inch self tapping screws work with typical cabinet materials, so the pull fastens directly through the front into the substrate. The plastic construction keeps the overall pull weight low, which is useful on narrow rails or thinner drawer faces where heavier hardware is not desired.
The EPCO 3-3/4 inch (96 mm) center to center black pull fits cabinet doors and drawers that use a 96 mm hole pattern, so it aligns well in banks of fronts drilled on a metric layout. The defined 96 mm center to center spacing supports projects where installers want a single drilling setting for both doors and drawers, simplifying shop or onsite setups. Plastic construction keeps the handle weight down on smaller or lighter fronts, which suits utility cabinets, shop storage, and many residential applications that do not require metal hardware. The black color lets the pull blend with black hinges or contrast against lighter laminates and paints, supporting straightforward visual coordination with other decorative hardware and moldings in the Wurth Baer Supply assortment. The 1-1/4 inch projection determines how far the grip sits from the surface, which influences how the pull feels in hand when opening heavier drawers.
The 96 mm center to center dimension on the MC303-2-BL pull gives installers a fixed spacing to build into jigs or CNC programs, which streamlines production of multiple cabinets using the same handle. The 3-3/4 inch overall center span matches a common size, so it suits both new work and jobs where existing drilling already follows a 96 mm pattern. A projection of 1-1/4 inch keeps the handle close enough to the face for a compact profile while still allowing fingers to wrap the grip, which matters on narrow stiles or near adjacent appliances. The #8 x 1-1/8 inch self tapping screws are sized for through-front mounting into the door or drawer substrate, which supports a secure pull point when installed to the proper depth. The clearly defined manufacturer part number MC303-2-BL from EPCO aids in specifying the same pull across drawings, purchase orders, and field replacements.
The EPCO MC303-2-BL pull uses a 96 mm center to center spacing, which sets the drilling distance between mounting holes for consistent cabinet layouts.
The MC303-2-BL pull has a 1-1/4 inch projection, setting the distance from the cabinet face to the grip for hand clearance and operation.
The EPCO MC303-2-BL pull is made from plastic, which keeps the handle lightweight for use on smaller doors and drawer fronts.
The EPCO 96mm center to center pull is black, providing a dark, uniform appearance that coordinates with other black decorative hardware.
The specified mounting fasteners are #8 x 1-1/8 inch self tapping screws, which secure the pull through the cabinet front into the substrate.
The manufacturer part number is MC303-2-BL, which identifies this specific EPCO 96 mm center to center black plastic pull for ordering and reordering.
The EPCO 3-3/4 inch (96 mm) center to center black pull combines a defined 96 mm hole spacing, 1-1/4 inch projection, and plastic construction, so it fits straightforward cabinet runs using this pattern. The black finish coordinates easily with other hardware choices, while the MC303-2-BL part number gives a clear reference when specifying or matching existing installs. For projects built around 96 mm drilling and lightweight pulls, this EPCO model offers a consistent option across multiple cabinets and fronts.
Sold In: 1 Each