EPCO wire pull 3 in center to center gives a straightforward handle option built around a known 3 inch (76 mm) hole spacing, so it matches standard drilling layouts and keeps layout time tight on cabinet and furniture runs. The pull uses a solid brass wire construction, which provides a solid metal feel at the grip point and keeps the profile visually light on doors and drawers. A dull brass finish tones down reflectivity, so the hardware reads as warm brass without a bright shine on installed casework. Center to center at 3 inches keeps this pull in the common size range for residential and light commercial cabinetry, fitting many layouts that already expect that spacing. Projection of 1-5/16 inches sets the handle out enough for fingers to hook behind it while still staying close to the front, which helps when working around tight clearances between doors and adjacent walls.
The center to center: 3 inch (76 mm) dimension on this EPCO wire pull defines the distance between mounting holes, which aligns with standard cabinet boring patterns and keeps drilling operations predictable across door and drawer fronts. Using that 3 inch spacing also supports direct swap situations on cabinets already bored at this size, so the handle can occupy existing holes without shifting layout lines. The projection: 1-5/16 inch measurement establishes how far the wire profile stands out from the surface, which influences how easily fingers can wrap the pull and how close doors can swing past adjacent obstacles. With this projection set, installers can account for reveals, overlay conditions, and nearby hardware when planning the pull location on face frames or slab fronts.
This EPCO wire series pull sits in the decorative hardware and moldings category under handles and pulls, so it is positioned for cabinet doors, drawers, and related casework fronts that need a simple bar-style grip. The solid brass material means every visible and touchable part of the wire profile is brass, which can visually align with other brass decorative hardware in the same space. A dull brass appearance keeps the color in the brass family while staying less reflective, which works on projects where the hardware should read as brass but not dominate glossy or highly figured fronts. With a 3 inch (76 mm) center to center drilling, this pull lines up with many existing cabinet handle layouts, so it can be used across runs of doors and drawers that share that spacing and still present a uniform visual line. The wire form also keeps the overall footprint compact, which can be useful on narrower rails or smaller drawer fronts that still need a functional pull.
The defined center to center: 3 inch (76 mm) measurement allows installers to set up boring jigs and templates once and repeat that pattern across a full bank of cabinets, which helps pulls land consistently and saves layout time on larger jobs. When working on replacements, the same 3 inch spacing means this EPCO MC402-3-DB pull can take over from other handles drilled on that standard dimension without shifting hole locations, which helps maintain existing finish conditions around the bore points. The projection: 1-5/16 inch figure sets a known stand-off from the door or drawer face, giving designers and installers a clear number when coordinating with adjacent doors, interior roll-outs, or nearby trim. Knowing the material is solid brass clarifies that the grip point presents brass at every contact surface, which can matter on jobs that call out brass hardware specifically in schedules or design notes. The dull brass description further defines the visual outcome, so the installed pulls will present a softer brass look that can sit comfortably alongside other decorative hardware and moldings specified in similar tones.
The EPCO MC402-3-DB pull uses a center to center: 3 inch (76 mm) drilling pattern, which aligns with a common cabinet handle spacing and helps standardize boring setups.
The solid brass wire pull has a projection: 1-5/16 inch, which defines the stand-off from the door or drawer face and affects finger clearance during daily use.
The EPCO wire series 3 inch pull is made from solid brass, so the wire profile presents brass at all visible and touchable surfaces along the handle.
The dull brass description signals a muted brass appearance, which keeps the pull in the brass color family while reducing reflectivity on cabinet doors and drawers.
This pull sits in the decorative hardware and moldings category under handles and pulls, positioning it for cabinet doors, drawers, and similar casework fronts.
The manufacturer part number MC402-3-DB uniquely identifies this EPCO wire pull, helping align project specifications, ordering, and reorders with the same 3 inch dull brass model.
The center to center: 3 inch (76 mm) layout, 1-5/16 inch projection, and solid brass construction define how this EPCO wire pull will sit and feel on cabinet fronts, giving clear dimensions to work into drawings and boring setups. The dull brass surface description tells you this handle will present a softer brass tone across doors and drawers, aligning with hardware schedules that call for brass without a high-gloss look. With a defined manufacturer part number MC402-3-DB and placement in the handles and pulls category, this piece slots directly into decorative hardware lists for cabinet and casework projects that need a compact wire-style brass pull.
Sold In: 1 Each