Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Wire Series 3 inch pull gives you a compact, aluminum handle in an oil rubbed bronze finish for cabinets and similar casework where a 3 inch center to center layout is needed. The 3 inch (76 mm) center to center dimension fixes the mounting hole spacing, so it lines up with layouts drilled for this standard size in cabinet doors and drawers. The aluminum material keeps the pull light while providing a defined gripping bar, which helps when opening and closing doors repeatedly in daily use. A projection of 1-5/16 inch sets the stand-off from the front of the cabinet, creating finger clearance between the door or drawer face and the pull. This projection also controls how far the hardware extends into working aisles, which matters on banked cabinets in tight spaces. The oil rubbed bronze finish gives a dark, uniform appearance that supports design choices calling for bronze-toned decorative hardware.
The 3 inch (76 mm) center to center measurement defines the critical drilling layout for this EPCO aluminum wire pull, so installers can position two holes at this spacing for accurate alignment across doors and drawers. This fixed spacing supports straight, repeatable runs on cabinet rows where multiple pulls must line up visually. The 1-5/16 inch projection defines the working depth of the pull from the cabinet face, so fabricators can anticipate how far the hardware will extend into use zones in kitchens or workrooms. With aluminum construction, the pull stays light relative to solid bar designs, which can matter on smaller doors or thinner drawer fronts. The oil rubbed bronze finish establishes the surface color before installation, helping shops coordinate this pull with hinges or other decorative hardware specified with a bronze appearance.
This EPCO aluminum wire pull with a 3 inch (76 mm) center to center dimension is suited to cabinet doors and drawers laid out on the 3 inch standard drilling pattern. That fixed spacing allows installers to position the pull horizontally on drawer fronts or vertically on doors using the same 3 inch template, which simplifies repetitive work on multi-cabinet runs. The wire-style shape creates a defined grip at a consistent height off the surface, guided by the 1-5/16 inch projection, so users can pull doors and drawers open with a similar feel from one cabinet to the next. The oil rubbed bronze finish lets this pull function as both a working handle and a visible decorative element, which is useful on projects where the hardware pattern carries across an entire room. With aluminum construction, the pull suits cabinet faces where a lighter handle is preferred over heavier solid metal forms.
The combination of a 3 inch (76 mm) center to center spacing and a 1-5/16 inch projection gives installers predictable geometry for layout and use. The center to center measurement controls drilling distance between two mounting points, which supports the use of jigs and patterns designed around 3 inch pulls for consistent positioning over many doors and drawers. The projection sets how far the pull extends from the surface, which helps avoid hand interference with the cabinet face when gripping the pull and supports a uniform gap behind the wire section. Because the pull is aluminum, it adds minimal weight even when used across a bank of cabinets, which can benefit lighter doors and small drawer fronts. The oil rubbed bronze finish provides a stable color reference, so when multiple pulls are installed in one space they present a coordinated bronze-toned appearance that aligns with decorative hardware choices.
This EPCO Wire Series 3 inch pull uses a 3 inch (76 mm) center to center spacing, which sets the required hole distance for aligning the pull on cabinet doors and drawers.
The MC402-3-ORB-AL pull has a 1-5/16 inch projection, so the gripping bar stands off the cabinet surface enough to allow finger clearance while limiting extension into walkways.
The EPCO aluminum wire pull is made from aluminum, which keeps the handle light on cabinet fronts and supports easy handling during layout and installation work.
This 3 inch wire pull has an oil rubbed bronze finish, giving it a dark bronze appearance that coordinates with bronze-toned decorative hardware on cabinets.
The 3 inch wire pull is typically used on cabinet doors and drawers drilled on a 3 inch center to center pattern, providing a consistent pull feel across multiple cabinet fronts.
The part number MC402-3-ORB-AL identifies this specific EPCO aluminum wire pull, helping shops and installers reorder the same model for matching future cabinet work.
The EPCO Wire Series 3 inch pull with a 3 inch (76 mm) center to center layout, 1-5/16 inch projection, aluminum construction, and oil rubbed bronze finish supports cabinet runs using this standard drilling pattern. Using the MC402-3-ORB-AL part number connects this specific wire pull to project notes and reorders, which helps maintain consistent hardware across jobs. For cabinet doors and drawers planned around a 3 inch spacing and a bronze-toned look, this aluminum wire pull offers defined dimensions that support repeatable layout and a uniform appearance across the installation.
Sold In: 1 Each