Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO wire pull 6 in center to center defines a handle designed for installations built around a 6 inch (152 mm) screw spread, so it lines up with standard drilling patterns on many cabinet doors and drawers. The pull uses an aluminum wire form, which keeps the handle lightweight while still providing a solid grip area for frequent opening and closing. An oil rubbed bronze finish on the aluminum body creates a dark, traditional look that pairs with many decorative hardware layouts in a shop or residential project. The handle is identified by manufacturer part MC402-6-ORB, which ties this specific size, material, and finish together for repeat ordering on multi-room or multi-unit work. A specified projection of 1-13/32 inch sets the working stand-off from the cabinet face, helping installers plan finger clearance and handle alignment with nearby fronts.
The 6 inch center to center measurement defines the distance between the pull's mounting points, so cabinet faces drilled on that spread accept this handle without additional layout changes. Because the projection is specified at 1-13/32 inch, the pull stands off enough from the door or drawer front to give a consistent handhold while limiting how far it extends into walkways or work aisles. The aluminum construction means each handle adds minimal weight to doors and drawers, which is relevant when specifying hardware for banks of fronts in kitchens, shops, or commercial casework. With the oil rubbed bronze finish, this wire pull visually coordinates with other oil rubbed bronze decorative hardware in the EPCO line, helping maintain a unified appearance across a run of cabinetry.
This aluminum wire pull with 6 inch (152 mm) center to center drilling fits cabinet layouts that are set for that specific hole spacing on doors and drawers, so it drops into standard 6 inch patterns without redrilling. The oil rubbed bronze finish aligns the pull with projects calling for a darker decorative hardware tone, allowing this handle to visually match other oil rubbed bronze components specified in the same room or bank of casework. Because the pull uses an aluminum wire form, it contributes very little added weight to each front, which matters when many doors and drawers are outfitted across larger installations. The 1-13/32 inch projection controls the stand-off from the cabinet surface, providing a predictable gripping space that suits repeated opening in kitchens, workrooms, or storage areas.
The 6 inch center to center dimension on this EPCO wire pull standardizes drilling for installers, so once jigs or CNC programs are set to that spacing, the same pull can be used across multiple fronts without layout adjustments. The aluminum material supports this repeatability by keeping each handle light, which helps doors and drawers operate consistently when many pulls are installed on a run of cabinetry. A 1-13/32 inch projection sets a uniform depth from the cabinet face, which helps align handles visually along rails and stiles while also influencing how fingers engage the pull during use. The oil rubbed bronze finish on the aluminum body keeps color and sheen consistent from handle to handle under the MC402-6-ORB identifier, supporting jobs where the same hardware specification carries through multiple rooms or units.
The 6 inch center to center measurement on this EPCO wire pull defines the distance between mounting points, guiding drilling and template setup for cabinet doors and drawers.
The 1-13/32 inch projection sets how far the pull stands off the cabinet face, establishing finger clearance and helping adjacent fronts operate without interference.
The MC402-6-ORB EPCO wire pull is made from aluminum, which keeps each handle lightweight while still providing a defined grip area on doors and drawers.
This aluminum wire pull uses an oil rubbed bronze finish, giving a darker decorative appearance that coordinates with other oil rubbed bronze hardware on the same project.
The MC402-6-ORB part number links the 6 inch center to center size, aluminum material, and oil rubbed bronze finish, simplifying reordering for repeat or multi-room work.
A 6 in center to center pull like this aluminum EPCO model suits cabinet doors and drawers drilled on a 6 inch pattern in kitchens, shops, or storage installations.
This EPCO aluminum wire pull with 6 inch (152 mm) center to center drilling matches projects laid out for that hole spacing, helping installers keep hardware consistent across cabinet runs. The 1-13/32 inch projection and oil rubbed bronze finish combine a predictable grip space with a darker decorative look that ties into other oil rubbed bronze hardware selections. Using the MC402-6-ORB identifier on orders keeps the 6 inch center to center size, aluminum construction, and finish aligned from job to job.
Sold In: 1 Each