EPCO Wire Series 3" (76 mm) Center to Center Oak Pull, - WP30-3

EPCO Wire Series 3 Inch Oak Pull For Cabinets

EPCO Wire Series 3 inch oak pull provides a wood handle with a 3 inch center to center, giving a defined mounting spread for cabinet doors and drawers. The 3-7/16 inch overall length sets the pull body slightly longer than the screw spacing, which helps cover typical drilling patterns. A 1-1/8 inch projection holds the grip away from the front, creating finger clearance when opening doors. The 15/32 inch width keeps the handle slim, which suits tight layouts where wide pulls would crowd each other. Oak material delivers a wood appearance that coordinates with many cabinet finishes in woodworking projects. This EPCO handle is part of the Handles and Pulls category, aligning it with other decorative hardware choices on the job. The WP30-3 manufacturer part number ties directly to this size and configuration, which supports repeat ordering on future projects.

Key EPCO Oak Pull Details For Cabinet Work

• The 3 inch center to center dimension defines the hole spacing, which simplifies drilling and layout on cabinet doors and drawer fronts.
• The 3-7/16 inch overall length extends beyond the screw span, which can help cover small chip-out around the mounting holes on finished fronts.
• The 1-1/8 inch projection sets the handle off the surface, providing working room for fingers when pulling doors and drawers open.
• The 15/32 inch width keeps the pull narrow, which fits banks of drawers or doors where hardware needs to sit close without crowding.
• Oak construction provides a wood handle, supporting use on wood cabinetry where a matching or complementary wood look is desired.
• Each pull is individually polybagged with (2) #8-32 x 1 inch screws, so the mounting screw size and length are defined for panel preparation.

Mounting And Sizing Details For Oak Wire Pull

The 3 inch center to center on this EPCO oak pull sets the distance between mounting points, which guides drilling jigs and templates during cabinet construction. With a 3-7/16 inch overall length, the handle body extends beyond the screw centers, which gives visible coverage around each fastener location. A 1-1/8 inch projection establishes how far the pull stands off the door or drawer face, influencing hand clearance and preventing knuckles from contacting the surface. The 15/32 inch width defines the narrow profile, which is useful when aligning multiple pulls on adjacent fronts. Supplied #8-32 x 1 inch screws match typical cabinet front thicknesses where machine threads are preferred, which supports secure mounting into prepared holes.

Using The WP30-3 Oak Pull In Cabinet Projects

Where This EPCO Oak Pull Works Best

This EPCO Wire Series 3 inch oak pull fits cabinet and drawer fronts drilled on a 3 inch center to center pattern, which is a common layout in many woodworking projects. The 3-7/16 inch overall length suits standard door and drawer widths, giving a balanced appearance without overwhelming narrow fronts. Oak construction aligns with wood cabinetry, supporting installations where a wood handle is preferred over metal. The 1-1/8 inch projection creates a defined stand-off, helping operators grasp the pull even on deeper-edge doors. With a 15/32 inch width, the handle remains slim, which helps when positioning pulls on closely spaced drawer banks or paired doors. This configuration fits decorative hardware needs where a simple wire-style wood pull is required.

Details That Support Repeatable Cabinet Installation

The defined 3 inch center to center measurement on the WP30-3 oak pull allows installers to reuse drilling jigs across multiple cabinets, which promotes consistent alignment from piece to piece. The 3-7/16 inch overall length gives a fixed reference dimension, so hardware positioning can be repeated across a whole run of cabinets. A 1-1/8 inch projection keeps the pull depth consistent, which matters when aligning hardware so doors and drawers present a uniform profile. The 15/32 inch width provides a repeatable narrow footprint, simplifying layout when spacing multiple pulls on wide drawer faces. The #8-32 x 1 inch screws specified with this pull set the thread size and length, which supports choosing compatible inserts or pre-threaded holes in shop workflows. Identifying the handle as EPCO WP30-3 helps maintain part consistency whenever matching existing installations.

Common Questions About The WP30-3 Oak Pull

Selecting This EPCO Oak Pull For Cabinet Runs

The EPCO Wire Series 3 inch oak pull combines a 3 inch center to center, 3-7/16 inch overall length, and 1-1/8 inch projection, giving defined dimensions for layout on doors and drawers. Oak construction supports wood cabinetry projects where a matching handle style is needed. With its 15/32 inch width, this pull suits tight hardware spacing along drawer banks. Using the WP30-3 part number at Wurth Baer Supply ties orders directly to this specific EPCO handle, supporting consistent hardware selection across cabinet jobs.