EPCO Wire Series 4 inch oak pull gives cabinets a wood handle that visually matches oak fronts, so installers can keep a consistent look across a run of doors and drawers. This WP30-4 wood cabinet pull uses a 4 inch center to center spacing, which lets it mount onto standard drilled cabinet handle patterns and keeps layout straightforward on new work or refacing jobs. The pull has a 4.5 inch overall length, so it fully covers a 4 inch bore pattern and leaves a small margin at each end for a finished appearance on face frames. A 1-1/8 inch projection sets the gripping surface away from the door or drawer front, providing hand clearance while keeping the pull tight to the cabinet for a clean profile. The 15/32 inch width creates a narrow, wire-style visual that works where a slimmer wood pull is preferred.
This EPCO wood pull uses a 4 inch center to center layout, so hole drilling is straightforward on both new cabinet builds and retrofit work where a 4 inch pattern is already present. With a 4.5 inch overall length, the handle sits slightly longer than the bore spacing, which helps bridge minor layout variations while still keeping the ends well inside most stile widths. The 1-1/8 inch projection defines how far the pull extends from the face, which lines up well with typical cabinet clearances around adjacent doors and walls. At 15/32 inch width, the pull remains slim on narrow rails or drawer fronts, supporting tight spacing between multiple handles on smaller cabinetry.
This EPCO Wire Series 4 inch oak pull works on cabinet doors and drawers that are set up for a 4 inch center to center handle, so it integrates into many standard layouts without changing drilling patterns. The oak construction ties in with oak cabinet faces, which keeps the installation visually unified when doors, drawer fronts, and trim share similar wood tones. Because the pull is 4.5 inches overall length, it fits neatly on common stile widths without crowding edges, which is useful on face-frame cabinets and narrower drawer fronts. The 1-1/8 inch projection creates functional finger clearance in front of raised panels or thicker drawer fronts, so users can grasp the pull without contact against the cabinet face. With a 15/32 inch width, the pull maintains a lean, wire-like look, which can suit projects that use smaller hardware footprints while still needing a wood handle that visually matches surrounding components.
The 4 inch center to center spacing on the WP30-4 wood cabinet pull is a core layout dimension, because it lines up with a widely used drilling standard and simplifies measuring handle locations across multiple doors and drawers. When an installer repeats that 4 inch pattern, the 4.5 inch overall length creates a consistent reveal at each end of the pull, which keeps runs of cabinets looking aligned and balanced. The 1-1/8 inch projection affects more than appearance; it defines working clearance between a users hand and the cabinet face, which is important where doors open near walls or appliances. The 15/32 inch width gives the pull enough surface for a steady grip while still reading as a slim wire-style profile, which can help when mixing this EPCO decorative handle with other narrow hardware in the same space. The oak material ties these dimensions to a warm wood presentation, which suits woodworking projects that prioritize natural cabinet components.
The EPCO WP30-4 wood cabinet pull uses a 4 inch center to center dimension, which matches many standard cabinet drilling patterns for straightforward layout.
The EPCO Wire Series 4 inch oak pull has a 4.5 inch overall length, so it extends slightly beyond the 4 inch hole spacing for a framed look on the cabinet face.
The EPCO WP30-4 wood pull has a 1-1/8 inch projection, which sets the grip away from the cabinet face and provides everyday finger clearance.
The WP30-4 oak cabinet handle is 15/32 inch wide, giving it a slim profile that keeps more of the door or drawer front visible.
The EPCO Wire Series WP30-4 pull is made from oak, which pairs well with oak cabinets and other wood components in woodworking projects.
This oak cabinet pull is identified by manufacturer part number WP30-4, which helps match it to EPCO decorative handles and pulls documentation.
The EPCO Wire Series 4 inch oak pull with 4 inch center to center spacing, 4.5 inch overall length, 1-1/8 inch projection, and 15/32 inch width gives a clear dimensional profile for cabinet planning. Using the WP30-4 wood cabinet pull on oak doors and drawers keeps hardware and faces visually aligned, supporting consistent runs across a kitchen or built-in. For projects where a slim, oak handle is needed within a standard 4 inch drilling layout, this EPCO pull offers a defined set of measurements that support repeatable results across multiple openings.
Sold In: 1 Each