EPCO oak pull 96mm center to center provides a wood handle option sized for standard 96 mm drilling, so cabinet and drawer fronts match a common boring pattern without layout changes. The 3-3/4 inch overall length keeps the pull visually compact, which suits smaller doors or drawers where space between fronts is limited. A projection of 1-1/8 inch sets the grip away from the surface, giving fingers room to grab without contacting the face frame or front. The 15/32 inch width keeps the pull narrow, so it fits on slimmer rails or drawer heads while still giving a defined edge to pull against. Oak construction delivers a wood look that coordinates with many cabinet styles, helping hardware blend into woodgrain doors and drawer fronts. The EPCO WP30-96 part number identifies this specific size and oak version, so it can be reordered consistently across a project.
The 96 mm center to center hole spacing on the EPCO WP30-96 pull sets the mounting posts at a standard metric distance, which aligns with pre-bored 96 mm cabinet and drawer fronts. The 4.25 inch overall length means the body extends slightly beyond the mounting points, so the ends visually cap the screw locations and cover the bored area cleanly. A 1-1/8 inch projection fixes the stand-off from the surface, which helps maintain a consistent grip depth across all doors and drawers using this model. The 15/32 inch width defines how much rail or stile face the pull will cover, assisting in placing it so edges remain visible for layout lines or design reveals. These defined dimensions support uniform alignment from one front to the next in a run of cabinetry.
The EPCO WP30-96 oak pull, categorized under handles and pulls, is designed for door and drawer applications where a 96 mm center to center pattern is required. By matching this 96 mm spacing, the pull works on fronts drilled to that standard, so a run of cabinets can share the same handle layout. The 3-3/4 inch overall length keeps the handle scaled for typical kitchen or bath fronts, helping maintain proportion on medium-width doors and drawers. Its 1-1/8 inch projection creates a consistent gap between the gripping surface and the cabinet face, which is useful when fronts vary in thickness but need similar hand clearance. With a width of 15/32 inch, the pull occupies a narrow band on the rail, so surrounding wood details and edges remain visible as part of the finished design.
The defined 96 mm center to center distance on this oak pull anchors hole locations, which simplifies repeating the same handle position from one cabinet front to the next. Because the overall length is 4.25 inch, there is a predictable amount of wood extending past each screw location, giving installers a visual cue for even spacing to door edges or panel details. The 1-1/8 inch projection helps keep hands clear of raised panels or applied moldings when the pull is used across different door styles in the same project. Its 15/32 inch width allows a consistent reveal of rail or stile material around the pull, which supports clean sightlines across banks of drawers. The EPCO brand and WP30-96 part number tie these dimensions to a specific component, which supports consistent selection for repeat work or matching existing installations.
The EPCO WP30-96 oak pull has a 96 mm center to center dimension, so it aligns with standard 96 mm hole spacing on cabinet doors and drawers for straightforward mounting.
The EPCO WP30-96 pull has an overall length of 4.25 inch, so it slightly exceeds the 96 mm mounting spread and visually caps the mounting points on the cabinet front.
The EPCO WP30-96 offers a 1-1/8 inch projection, setting the grip off the door or drawer face to give finger clearance during everyday opening and closing.
The EPCO WP30-96 pull has a width of 15/32 inch, so it occupies a narrow band on the rail or drawer front while still giving a defined edge to pull against.
The EPCO WP30-96 is an oak wood pull listed under decorative hardware and moldings handles and pulls, suiting projects that call for wood handles on cabinets.
The EPCO WP30-96 is specified with #8-32 x 1 inch screws, so the threaded posts match common cabinet hardware standards for straightforward handle installation.
The EPCO WP30-96 oak pull combines a 96 mm center to center dimension with a 4.25 inch overall length, giving projects a defined handle size that matches standard boring. Its 1-1/8 inch projection and 15/32 inch width set a consistent grip profile across doors and drawers. As an oak handle in the decorative hardware and moldings handles and pulls class, it coordinates with wood cabinetry while maintaining known dimensions for layout. For work that calls for a wood pull in this specific size, this EPCO model aligns with common cabinet drilling patterns and handle proportions.
Sold In: 1 Each