EPCO Wire Series 2 inch center to center oak pull sets a consistent 2 inch mounting spread, which helps align multiple pulls across doors and drawers on a run. The 4 inch overall length adds hand room beyond the screw centers, which supports a comfortable grip on cabinet fronts. The 29/32 inch projection brings the handle off the face just under an inch, which creates clearance for fingers while keeping the pull close to the door for a tight, compact look. The 27/32 inch width defines a slim oak profile, which fits well on narrower rails and smaller drawer fronts. The surface mount design with no insert keeps the pull straightforward to position on flat cabinet faces, which suits straightforward layouts in shops or on site work. The oak construction provides a wood appearance that can coordinate with wood cabinetry where a matching pull is needed.
The surface mount configuration on this EPCO oak pull keeps all contact on the outer face of the cabinet, which fits typical flat panel doors and drawers. The fixed 2 inch center to center spacing sets the drilling pattern, which allows consistent hole placement along a cabinet run when jigs or templates follow the same dimension. With a 4 inch overall length, the pull extends equally beyond the mounting points, which helps maintain visual balance between neighboring fronts. The 29/32 inch projection creates a defined offset, which allows fingers to wrap behind the pull without needing additional spacers. The 27/32 inch width keeps the profile modest, which suits both narrow stiles and wider drawer faces on various cabinet layouts.
This EPCO WP31 oak pull is classified under Decorative Hardware & Moldings in Handles and Pulls, which positions it for use on cabinet doors and drawers in woodworking projects. The 2 inch center to center mounting dimension aligns with short-span handle applications, which fits smaller doors, vanity drawers, or compact cabinet sections. Its 4 inch overall length gives proportion to modest-sized fronts, which helps keep hardware in scale on residential or shop-built cabinets. The oak construction supports use wherever a wood pull is preferred, which is common in wood-focused installations from cabinet shops or finish carpentry settings. Being part of the EPCO Wire Series places this pull in a recognizable line, which helps maintain a uniform visual style when the same series is carried across a room of cabinetry.
The defined 2 inch center to center screw spacing on the EPCO WP31 allows installers to set up drilling jigs to that single measurement, which speeds repetitive installations while holding alignment across doors and drawers. The 4 inch overall length ensures that, once mounted, each pull presents equal extension past the screw locations, which aids in achieving a consistent look along cabinet runs. The 29/32 inch projection controls how far the pull stands off the face, which keeps clearances predictable around adjacent doors or appliances. With a 27/32 inch width, the handle occupies a restrained footprint on the front, which reduces interference with edge details or narrow rails. The surface mount, no-insert design places the pull directly on the cabinet surface, which simplifies the mounting interface and limits variables during layout and fastening on woodworking projects.
The EPCO Wire Series WP31 oak pull has a 2 inch center to center dimension, which sets the hole spacing used to drill and mount it on cabinet doors or drawers.
The EPCO Wire Series 2 inch center to center oak pull has a 4 inch overall length, which provides added gripping area beyond the mounting holes on cabinet fronts.
The EPCO WP31 oak pull projects 29/32 inch from the mounting surface, which offers usable finger clearance while keeping the handle close to the cabinet face.
The EPCO WP31 wire series oak pull has a 27/32 inch width, which creates a slim handle profile suited to narrower rails or smaller cabinet fronts.
The EPCO WP31 oak pull is a surface mount design with no insert, which places the pull directly onto flat cabinet doors or drawer fronts during installation.
The EPCO WP31 pull is listed under Decorative Hardware & Moldings in Handles and Pulls, which aligns it with typical cabinet door and drawer pull applications.
The EPCO Wire Series 2 inch center to center oak pull combines fixed 2 inch mounting spread, 4 inch overall length, 29/32 inch projection, and 27/32 inch width, which together support consistent layout and grip on cabinet doors and drawers. Choosing the WP31 part number ties your project to an EPCO Wire Series handle with a wood oak profile, which helps align decorative hardware with wood cabinetry across woodworking or cabinet installations.
Sold In: 1 Each