EPCO recessed pull is a 4 inch (102 mm) length pull that sits inside a mortised pocket, so doors and drawers stay flush while still being easy to open. The pull is designed as an oval recessed style, which keeps the grip out of the way of traffic paths and tight clearances where a projecting handle could snag. Its dull chrome finish gives a muted metallic look, which helps it blend into many cabinet and fixture designs without drawing attention. The pull is made from zinc, so the body is solid metal, which supports a firm hand grip when opening heavier doors. The EPCO brand and WP38-DC part number identify this recessed pull within Wurth Baer Supply's decorative hardware and moldings offering, which helps shops specify and repeat the same component across projects.
This EPCO recessed pull is sized to mortise into a 7/8 inch by 3-13/16 inch hole, so layout is straightforward for installers using standard measuring and routing setups. The 4 inch (102 mm) overall length aligns with that cutout size, which helps the pull seat neatly in the prepared opening without excessive gap at the ends. Because it is a recessed style pull made from zinc, the installer creates a pocket in the door or drawer face and seats the pull within that pocket, resulting in a low-profile grip. The dull chrome finish on the exposed face means once it is fitted, the visible surface presents a consistent look across multiple installed pulls.
This EPCO 4 inch length recessed pull fits applications where a mortised grip is preferred over a surface-mounted handle, such as cabinet doors, drawers, or panels that need a flush front. Because it mortises into a 7/8 inch by 3-13/16 inch hole, it suits jobs where a defined rectangular pocket can be machined, such as shop-built cabinetry or fixtures. The oval recessed form keeps the pull within the thickness of the door or drawer face, which is useful around sliding doors or tight walkways where projecting hardware might interfere with movement. The dull chrome finish lets the pull coordinate with other dull chrome hardware in the same run, so designers can carry a consistent metal tone across hinges, knobs, and pulls. Its zinc construction gives a solid metal component, which fits well in woodworking environments that expect metal hardware on frequently used fronts.
The specified 4 inch (102 mm) length and 7/8 inch by 3-13/16 inch mortise requirement give installers exact dimensions for repeat work, so multiple doors or drawers can be machined to the same layout and accept the same pull without rework. Using a recessed zinc pull means the hardware sits inside the panel, which supports a streamlined front surface that aligns with contemporary cabinet lines or fixture standards. The dull chrome surface helps visually tie the pull into other decorative hardware and moldings from Wurth Baer Supply using similar finishes, which simplifies selection when matching components by appearance. With the WP38-DC manufacturer part number tied to this oval recessed pull, shops can document that identifier on drawings or cut lists, so future replacements or additional units match the original installation exactly.
The EPCO recessed pull mortises into a 7/8 inch by 3-13/16 inch hole, so installers can set up routing templates or drilling patterns to those exact dimensions.
The EPCO WP38-DC recessed pull has a 4 inch (102 mm) length, providing a continuous gripping edge across typical cabinet door or drawer widths.
The EPCO recessed pull is made from zinc, giving it a metal body suitable for repeated opening and closing on cabinet doors and drawers.
The 4 inch recessed pull has a dull chrome finish, allowing it to coordinate with other dull chrome decorative hardware in the same installation.
The mortise-style recessed pull suits cabinet doors, drawers, or panels where a flush front is desired and a 7/8 inch by 3-13/16 inch pocket can be machined.
The WP38-DC part number identifies this specific EPCO oval recessed pull in dull chrome, helping shops specify and reorder the same component consistently.
The EPCO recessed pull combines a 4 inch (102 mm) length, zinc construction, and dull chrome finish in an oval recessed form that mortises into a 7/8 inch by 3-13/16 inch hole. Those fixed dimensions and materials give shops clear information for layout, machining, and finish coordination when planning cabinetry or fixture runs. For projects needing a flush, metal recessed grip sourced through Wurth Baer Supply, the EPCO WP38-DC part number anchors this pull as a repeatable choice across similar installations.
Sold In: 1 Each