EPCO 96mm center to center pull provides a 3-3/4 inch mounting spread that lines up with standard 96mm boring, which helps streamline layout on cabinet doors and drawers. The zinc alloy wire design creates a 3/8 inch diameter grip, giving a consistent feel across all fronts on a run of cabinets. The 1 inch projection sets the handle off the surface just enough for fingers to clear the door or drawer face. The white finish matches the white description, helping this pull blend into painted or laminate white fronts. Surface mount construction keeps the work on the face of the panel, so the installer works from one side without hidden fittings. The EPCO ZP402-96-WH part number ties directly to this 96mm center to center layout, supporting repeat use on multi-cabinet projects.
The surface mount design on this EPCO ZP402-96-WH pull means the installer works entirely from the face of the cabinet door or drawer front. The 96mm center to center spacing sets the hole pattern, so a drilling jig or boring machine can be set once for a run of fronts. With a 1 inch projection, the pull stays close to the face while still providing room for a standard hand grip. The 3/8 inch diameter wire gives a predictable contact point for fingers along the handle. The zinc alloy construction keeps the pull as a single metal piece, which supports consistent tightening at each mounting point. The white finish described in the product name and web description matches white cabinet fronts where a light-colored pull is needed.
The 96mm center to center EPCO ZP402-96-WH pull fits door and drawer fronts bored for 96mm spacing, aligning with many cabinet hardware layouts. On new work, the 96mm dimension lets you standardize drilling across upper and lower cabinets, so every front shares the same handle spacing. The 3-3/4 inch span created by the 96mm centers gives a balanced look on mid-size doors and typical drawer widths. With a 1 inch projection off the surface, the handle offers clearance while staying compact enough for tight banks of drawers. The white finish supports use on white cabinetry where a matching pull is preferred. Because the pull is surface mounted, it can be positioned on wood, laminate, or similar door and drawer materials that accept standard bored holes.
The specified #8-32 x 1 inch screws interface with the pull threads, tying the zinc alloy body tightly to the front once the holes are drilled. The 3/8 inch diameter wire shape gives a rounded profile, which helps users grab the pull from different angles on frequently used doors. With zinc alloy construction, the pull maintains its form around the threaded mounting area when properly tightened. The 96mm center to center spacing works with common drilling templates, supporting repeatable hole placement across a full kitchen or shop installation. The 1 inch projection helps prevent knuckles from rubbing directly on the door or drawer face during regular use, which is useful on heavy-traffic fronts. The white finish noted in the descriptions makes this pull suitable when a consistent white color is part of the project design.
The EPCO ZP402-96-WH pull has a 96mm center to center dimension, so the mounting holes are spaced 96mm apart for straightforward drilling and alignment on cabinet fronts.
The pull has a 1 inch projection, holding the grip off the cabinet surface enough for finger clearance while keeping the handle relatively low profile on doors and drawers.
The EPCO ZP402-96-WH pull uses a 3/8 inch diameter wire, providing a round grip size that feels consistent from one cabinet front to the next in a run.
This EPCO pull is surface mount, so it attaches through drilled holes in the door or drawer face using the threaded mounting interface built into the handle.
The EPCO 96mm cabinet pull is made from zinc alloy, giving a metal construction that supports everyday cabinet door and drawer use in typical woodworking environments.
The EPCO ZP402-96-WH pull is described as white in the product name and web description, matching white cabinet fronts where a light-colored handle is needed.
The EPCO 3-3/4 inch (96mm) center to center white pull ZP402-96-WH offers a 96mm mounting pattern, surface mount design, and 1 inch projection that suit cabinet doors and drawers. The zinc alloy construction, 3/8 inch diameter wire profile, and white finish support consistent appearance and function across full cabinet runs. For projects built around 96mm boring, this EPCO pull from Wurth Baer Supply aligns layout, color, and feel in a straightforward cabinet hardware choice.
Sold In: 1 Each