10FT clear anodized inside corner is a metal edge molding from Paramount Extrusions Company that finishes an interior corner along an edge, giving a defined transition between two meeting surfaces. As part of the metal edge moldings category, it serves as a shaped trim that protects the corner of the workpiece while creating a consistent, straight line visually along the joint. The clear anodized description identifies it as having an anodized surface treatment in a clear tone, which provides a uniform metallic appearance across the full 10-foot length. The 10FT length helps span long runs in a single piece, reducing joint lines along corners. The inside corner design means the profile is formed to sit into a 90-degree interior corner area, which helps guide placement where two surfaces meet at an internal angle on an edge or surfacing job.
The 10FT clear anodized inside corner designation tells you that this metal edge molding is intended to run along internal corners over an extended length, so planning cuts and layout around a single 10-foot piece can reduce field splices in many applications. Being part of the metal edge moldings class means the profile is shaped for edge treatment, which supports a controlled register point as you align it along panel or surfacing edges at an interior angle. The clear anodized finish maintains a consistent look along the full length of the corner, which simplifies visual alignment from one end of the corner to the other. Referencing Paramount Extrusions EAM5173A and Manufacturer Part # 12141 provides traceable identifiers, which helps match the fit and look on replacement work or expansions of an existing installation using the same profile.
This product is categorized as 10FT clear anodized inside corner in metal edge moldings, so it is oriented toward interior corner edges where two surfaces meet and need a defined metal trim. The inside corner identity indicates its profile is suited to sit into a recessed angle rather than over an outside edge, directing its use to interior joints along cabinets, surfacing transitions, or similar corner runs that call for an internal corner treatment. The 10FT length helps handle longer edges without breaking the line of the corner, which benefits installations that favor a continuous metal appearance from end to end over the corner span. As part of the Paramount Extrusions Company line, this edge molding sits within a family of shaped metal profiles, giving it a place in projects that standardize on that manufacturer for matching interior corner profiles.
The fact that this is a 10FT clear anodized inside corner molding influences layout, because one full-length piece can carry through much of a run before any joint is required, which can reduce alignment checks at intermediate seams. The classification as a metal edge molding means the corner is formed from metal, supporting a firm, defined edge along the interior corner that helps keep the visual line straight where two surfaces intersect. The clear anodized wording describes a specific surface treatment and appearance, so the resulting finish presents a consistent metallic tone along the full piece, which matters when aligning multiple edges in the same field of view. The presence of both Paramount Extrusions EAM5173A and Manufacturer Part # 12141 in the description ties the product to a stable reference for reorders, supporting consistent fit and look when future work needs to match the original inside corner installation on additional panels or sections.
The 10FT clear anodized inside corner is a metal edge molding used to finish and define interior corner edges where two surfaces meet, providing a shaped metal trim at that internal angle.
The Paramount Extrusions inside corner molding is described as 10FT, meaning it is provided in a ten-foot length for longer, continuous interior corner runs.
This inside corner trim is described as clear anodized, indicating it has an anodized surface in a clear metallic appearance for a consistent look along the metal profile.
This inside corner is listed under metal edge moldings in the Edgebanding & Surfacing category, indicating it is a shaped metal trim for edge and corner applications.
The EAM5173A inside corner molding is associated with Paramount Extrusions Company, tying the profile and performance to that specific metal extrusion manufacturer.
The references Paramount Extrusions EAM5173A and Manufacturer Part # 12141 identify this exact inside corner profile, helping match the same molding on future or expansion work.
The 10FT clear anodized inside corner from Paramount Extrusions Company combines a defined metal edge molding profile with a clear anodized appearance, giving you a specific interior corner trim for longer runs. Its place in the metal edge moldings class and its 10-foot length provide a clear role wherever an internal corner edge needs a continuous metal transition piece. With the identifiers Paramount Extrusions EAM5173A and Manufacturer Part # 12141, Wurth Baer Supply offers a traceable inside corner option when you want the same profile and appearance repeated across multiple projects or follow-up installations.
Sold In: 1 Each