Berenson Tempo Series Pull For Cabinet Projects

Berenson Tempo Series pull gives you a transitional cabinet handle that balances classic comfort with clean lines for residential or shop-built cabinetry. The 1127-2BPN-P part is a steel pull with a brushed nickel finish, so it provides a sturdy gripping surface with a muted metallic look that works in many design schemes. Its 8-13/16 inch overall length spreads the handle visually across wider drawer fronts or doors, which helps distribute hand contact over a longer area when opening heavier fronts. The 224 mm center to center dimension positions mounting holes at a common European spacing, supporting consistent layout across multiple fronts. A 1-1/4 inch projection pulls the gripping surface away from the door face, which leaves space for fingers to wrap behind the pull during everyday use. The 1/2 inch width keeps the profile slim, so the pull sits neatly on narrow rails or small drawers without overpowering the front.

Key Tempo Series Pull Details For Daily Use

• The brushed nickel finish on this pull presents a soft metallic surface that visually blends with many hinge and fixture finishes, so a run of cabinets can share a unified hardware look across the project.
• The steel material gives the pull a solid feel under hand, so frequent opening and closing of doors or drawers can be done with a firm grip on a stable handle body.
• The 8-13/16 inch overall length creates a longer grabbing area, so users have flexibility to pull from the center or closer to the ends depending on door size and reach.
• The 224 mm center to center spacing sets hole locations on a precise metric grid, so drilling jigs or templates can be reused from one cabinet front to the next for consistent alignment.
• The 1-1/4 inch projection positions the handle away from the face of the cabinet, so fingers have clearance behind the pull when opening doors near adjacent walls or tall frames.
• The 25/32 inch hand clearance dimension defines the open space between the pull and the door surface, so installers can anticipate how comfortably different hand sizes will fit behind the handle.

Mounting Dimensions That Guide Cabinet Layout

The 224 mm center to center dimension on this Berenson Tempo Series pull sets a fixed distance between mounting points, so hole drilling on drawers and doors can follow a repeatable layout pattern across a kitchen or bank of cabinets. The base diameter of 3/8 inch defines the footprint where the pull meets the surface, which helps with planning edge distances and reveals when working near narrow stiles. The 11-3/16 inch overall length gives you the full tip-to-tip size to check against panel widths when deciding horizontal placement on wide drawers. The 1/2 inch width keeps the pull narrower than many rail heights, which supports centering along mid-rails without crowding decorative profiles. With these dimensions defined, installers can coordinate hardware placement with other layout elements such as appliances, tall panels, and adjacent fronts.

Using This Brushed Nickel Pull In Cabinet Work

Where This 224 mm Cabinet Pull Fits Best

This Berenson Tempo Series pull, with a 224 mm center to center dimension, fits cabinet fronts that are laid out on metric drilling patterns, so it works well on projects where fronts are pre-bored or templated to that spacing. The transitional style designation places the pull visually between traditional and contemporary lines, so it can be used on flat-panel doors as well as more detailed fronts without clashing with existing profiles. Its 8-13/16 inch overall length suits wider drawers and tall doors, letting the handle span more of the front for a proportional look on pantry units, base cabinets, and large utility doors. The 25/32 inch hand clearance works for applications where users need a defined gap behind the pull, such as on thicker door fronts or doors near facing cabinets, because it keeps fingers from binding against the surface. With a brushed nickel finish, the pull can be matched to other brushed nickel hardware on the job, keeping hinges, pulls, and other fittings visually consistent.

Details That Support Repeatable Cabinet Results

The precise 224 mm center to center measurement on this 1127-2BPN-P pull allows drilling jigs to be set once and reused across multiple fronts, which reduces layout variation on a full run of cabinets. The 3/8 inch base diameter defines a compact contact circle at each mounting point, which helps installers position the pull without overlapping narrow rail edges or decorative routing. The 1-1/4 inch projection, combined with 25/32 inch hand clearance, establishes a known stand-off from the door face, so designers can predict how the pull will interact with adjacent fronts, appliance panels, and wall returns. The 1/2 inch width keeps the grip slim, which can be important on closely spaced drawer stacks where multiple pulls line up vertically and users want room between handles. Because the material is steel, the pull provides a rigid feel when fastened to the cabinet, supporting smooth operation when doors or drawers are opened from the handle ends or the center over time.

Common Questions About This Tempo Series Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Tempo Series pull with 224 mm center to center spacing, brushed nickel finish, and steel construction gives you a defined set of dimensions for planning cabinet hardware layouts. Its transitional style and 8-13/16 inch overall length suit a range of door and drawer sizes, from wider base cabinets to tall pantry units. With projection, hand clearance, base diameter, and width all specified, this 1127-2BPN-P pull can be matched to your drilling patterns and front designs so cabinet hardware lines stay consistent from one opening to the next.