Berenson Tempo Series 11-11/32" (288 mm) Center to Center Brushed Nickel Pull, - 1128-2BPN-P

Berenson Tempo 288mm Brushed Nickel Cabinet Pull

Berenson Tempo 288mm brushed nickel pull is a steel handle designed for projects needing a 288 mm center to center size, so it suits layouts built around that extended drilling pattern. The Tempo Series and Classic Comfort style define this pull as a transitional option, so it works on jobs where the design needs to bridge traditional and contemporary fronts. The brushed nickel finish diffuses reflections, which supports a consistent look across multiple doors or drawers under varied lighting. Steel construction gives the pull a solid feel when operating cabinet fronts, which matters on larger or heavier doors. At 13-11/16 inches overall length, this pull visually spans wider faces, helping tie together tall pantry doors or banked drawer sections. The Berenson Corporation branding and part number 1128-2BPN-P identify this specific size and configuration for repeat ordering.

Key Tempo Series Pull Details For Projects

• The center to center measurement of 288 mm sets the drilling layout, so installers can plan hole spacing accurately on wide cabinet faces or drawer fronts that require a long pull.
• The 13-11/16 inch length or diameter dimension shows the overall handle span, helping coordinate proportion and alignment with door stiles, drawer widths, and adjacent hardware on the same run.
• The 1-1/4 inch projection defines how far the pull stands off the surface, giving fingers room behind the bar and helping doors clear surrounding trim during normal operation.
• The 25/32 inch hand clearance detail indicates the usable space for grip, which supports comfortable everyday use on frequently accessed cabinet doors and drawers.
• The 1/2 inch width provides a slim profile across the front, contributing to a clean, linear look while still offering a defined edge for a secure pull motion.
• The 3/8 inch base diameter at each mounting point concentrates the visual footprint, which helps the pull sit neatly over standard bore points on cabinet fronts.

Installation Dimensions And Mounting Fit Details

The 288 mm center to center dimension defines where mounting holes must be drilled, allowing consistent placement across multiple fronts on a run of cabinets. The specified screw size of 8-32 x 1 inch ties this pull to typical cabinet door and drawer front thicknesses that suit that thread and length. The 1-1/4 inch projection and 25/32 inch hand clearance work together to keep fingers away from the door surface while still staying close enough for a compact installation. With a 13-11/16 inch overall length, installers can align the pull across wide faces without guesswork, since the dimension sets clear start and end points relative to panel edges.

Using This Transitional Steel Pull In Cabinet Runs

Where This Tempo Series Pull Fits Best

The Tempo Series, identified in the web description, positions this pull within a coordinated collection, so it can be used across doors and drawers that share the same design language. Its Classic Comfort transitional style allows it to sit on both framed and frameless cabinet fronts where the aesthetic needs to avoid being strictly traditional or fully modern. The brushed nickel finish works on projects using similar metal tones, helping tie hinges, knobs, and pulls into a single visual set. With an overall length of 13-11/16 inches, this pull suits tall pantry doors and wide drawers where a shorter handle would look undersized. The 288 mm center to center drilling dimension keeps hole spacing wide, which visually balances broader faces. The 1/2 inch width keeps the bar visually light, which is useful when many pulls are lined up across a long bank of cabinets.

Details That Support Consistent Operation And Layout

The 1-1/4 inch projection works with the 25/32 inch hand clearance to give fingers room behind the pull, which helps users get a reliable grip even on heavier loaded drawers. The 3/8 inch base diameter keeps the contact area at the surface compact, which helps the pull sit squarely over standard bore points without covering too much of the door profile. Steel material construction provides a firm feel when opening and closing doors or drawers many times a day. The 288 mm center to center dimension standardizes drilling across multiple fronts, reducing layout variations when repeating this pull down a full kitchen or bank of cabinets. The 8-32 x 1 inch screw size aligns with common cabinet construction practices, so the pull interfaces cleanly with typical door and drawer front thicknesses that match this hardware specification. The Berenson Corporation name and part number 1128-2BPN-P give clear identification for maintenance or future matching.

Common Questions About This Berenson Tempo Pull

Selecting This Pull For 288mm Cabinet Layouts

The Berenson Tempo 288mm brushed nickel pull combines a 288 mm center to center layout, 13-11/16 inch overall length, and 1-1/4 inch projection for wide cabinet fronts needing a long handle. With steel construction, brushed nickel finish, and Classic Comfort transitional styling, it suits projects using the Tempo Series look across doors and drawers. For work requiring this specific 1128-2BPN-P configuration, this pull provides the defined dimensions and finish needed to match existing layouts or plan new runs around a consistent drilling pattern.