Berenson Swagger Series 3-3/4" (96 mm) Center to Center Slate Pull, - 2390-1SLT-P

Berenson Swagger Slate Pull For Cabinets

Berenson Swagger Series slate pull gives cabinets a contemporary upgrade by combining a defined profile with a slate finish, so handles on doors and drawers match modern projects while staying consistent across a run of hardware.

The Swagger Series identity ties this pull to a known Berenson Corporation decorative hardware line, which matters on multi-room jobs where matching style and brand keeps hardware coordinated from piece to piece.

The 3-3/4 inch (96 mm) center to center measurement sets the drilling layout, so existing or new holes can be spaced accurately when planning rails, stiles, or drawer fronts around this handle.

The pull is made from zinc, which provides a solid feel at the hand point while keeping weight reasonable on typical cabinet doors and drawers.

The 4-3/16 inch overall length defines the footprint on the face, so its visual scale lines up with door and drawer sizes in contemporary installations.

The slate finish establishes the surface color and sheen, helping this pull align with darker finishes and mixed-material cabinet layouts.

Key Swagger Pull Details For Cabinet Projects

• The 96 mm center to center spacing sets consistent hole locations, which simplifies drilling jigs and helps repeat placements across multiple cabinet fronts on a job.
• The 1-1/4 inch projection defines how far the pull stands off the surface, creating enough space for a natural grip while keeping the hardware close for a clean, contemporary profile.
• The 15/16 inch hand clearance specifies the usable space behind the pull, so fingers can wrap comfortably without rubbing the door or drawer face during everyday operation.
• The 5/8 inch width provides a slim front face, giving a refined line that suits contemporary styling while still presenting enough surface for a controlled grip.
• The 1/2 inch base diameter indicates the footprint at each mounting point, helping lay out margins from panel edges and trim details so the pull seats neatly.

Cabinet Pull Fit, Mounting, And Hole Layout

The 96 mm center to center dimension guides drilling from screw to screw, so installers can set up templates or CNC programs around an exact spacing that repeats accurately across doors and drawers.

The 4-3/16 inch length shows how much of the door or drawer front the pull will span, which helps position it relative to panel rails or edge profiles without crowding other hardware.

The 1-1/4 inch projection works with the 15/16 inch hand clearance to define the working reach, allowing hands to grab from the front without contacting the cabinet surface.

The 1/2 inch base diameter at each mounting point provides a known bearing area on the face, supporting stable seating on common cabinet materials.

Using This 96 Mm Swagger Pull On Projects

Where This 96 Mm Slate Cabinet Pull Fits

This Swagger Series 96 mm cabinet pull suits cabinet doors and drawers that are laid out for 3-3/4 inch center to center hardware, so it aligns well with standard drilling patterns in many contemporary kitchens, baths, and casework runs.

The slate finish supports projects using darker tones or mixed metal schemes, allowing the pull to visually connect with hinges or other slate-finished decorative hardware from the same visual family.

The 4-3/16 inch overall length works on both narrower doors and medium-width drawers, giving a consistent look when used in repetition across banks of fronts.

The contemporary style designation means the profile and lines are suited to flat-panel or simple frame-and-panel fronts, keeping the hardware in step with modern cabinet designs.

The 5/8 inch width keeps the pull visually light on smaller fronts, helping avoid a bulky appearance while still presenting a defined line across the face.

Details That Support Consistent Cabinet Results

The 96 mm center to center measurement supports consistent installation because it defines the screw spread for all fronts using this model, simplifying layout and reducing the chance of misaligned pulls on a long run.

The zinc material supports everyday cabinet use by providing a solid-feeling handle at the touch point, which matters on frequently used doors and drawers.

The 1-1/4 inch projection combines with the 15/16 inch hand clearance to give fingers practical space behind the pull, helping doors and drawers operate without knuckles contacting finished surfaces.

The 1/2 inch base diameter at each mounting point gives a clear reference for edge setbacks, so installers can keep pulls aligned relative to stile widths or drawer rail heights.

The slate finish provides a consistent surface appearance along the length of the pull, which supports a unified look when the same model is repeated across multiple cabinets.

The Swagger Series branding helps identify the pull within Berenson Corporation offerings, which matters when matching this 2390-1SLT-P model on add-on cabinets or later modifications.

Common Questions About The Swagger Slate Pull

Select This Swagger Pull For 96 Mm Layouts

The Berenson Swagger cabinet handle in slate matches 96 mm center to center cabinet layouts, so it drops into 3-3/4 inch drilling patterns while keeping a contemporary profile that suits modern casework.

The zinc construction, 4-3/16 inch length, and 1-1/4 inch projection combine to give a balanced handle that works across doors and drawers using this spacing.

For projects calling for slate finish hardware within the Swagger Series look, this 2390-1SLT-P model aligns design and measurements for consistent cabinet runs.