Description
Berenson Domestic Bliss Pull For Cabinets And Drawers
Berenson Domestic Bliss pull gives cabinets and drawers a transitional look using the Domestic Bliss Series Classic Comfort style, helping projects match designs that bridge traditional and contemporary spaces. The pull uses zinc material, which provides a metal body suited to everyday cabinet use in kitchens, baths, and built-ins. A slate finish defines the surface appearance, supporting jobs that call for a darker, modern tone instead of bright metal. The center to center dimension of 224 mm sets the hole spacing, so layouts can be drilled or checked against this fixed measurement to keep handles aligned across multiple fronts. Overall length of 9-3/4 inches gives this pull a substantial span across wider doors or drawer fronts, supporting consistent visual lines on banks of cabinets. Hand clearance of 1-1/16 inches describes the open space behind the pull, giving installers a concrete number when planning ergonomic access for fingers.
Functional Details That Support Cabinet Projects
- The 224 mm center to center spacing defines hole locations, allowing installers to plan drilling jigs and cabinet layouts around a repeatable metric distance.
- The 9-3/4 inch length provides a longer grip area, which suits wider drawers or doors where a short pull could look undersized or feel less comfortable in use.
- A projection of 1-1/2 inches sets how far the pull stands off the face, giving consistent clearance so hands can grasp from above or below without rubbing the surface.
- The 13/16 inch width describes the front face dimension, shaping the visual weight of the pull on the cabinet and helping designers coordinate with neighboring hardware.
- A base diameter of 15/16 inch at each mounting point defines the footprint against the door or drawer, which can help cover previous smaller impressions when updating hardware.
- Hand clearance of 1-1/16 inches provides a defined gripping space behind the pull, which can aid users with larger hands when opening heavier drawers.
Installation Dimensions And Mounting Fit Details
The center to center dimension of 224 mm directly supports layout work, because this measurement dictates the drilling distance for the two mounting points. The manufacturer identifies screw size as 8-32 x 1 inch, tying the pull to a specific thread and length that matches standard cabinet door and drawer thickness ranges. An overall length of 9-3/4 inches offers clear endpoints when aligning handles relative to panel edges or rail lines. Projection of 1-1/2 inches defines stand-off from the surface, which influences how doors swing past adjacent faces in tight installations. A base diameter of 15/16 inch at each end establishes the bearing surface against the cabinet, which can help when covering prior installation marks from smaller pulls during retrofit work.
Using This Slate Pull In Real Cabinet Work
Where This 224 mm Slate Cabinet Pull Fits
The Domestic Bliss Series designation places this pull within Berenson decorative hardware aimed at cabinet applications where appearance and function carry equal weight. A 224 mm center to center spacing suits cabinets designed around metric drilling systems or jigs that target this specific dimension. The 9-3/4 inch overall length makes this pull a match for medium to wide doors and drawer fronts, allowing a single handle to span more of the front for comfortable leverage. Its transitional style connects with projects that combine classic and modern elements, such as shaker doors paired with contemporary surfaces. The slate finish positions this pull for use on lighter cabinet colors where contrast is desired, or on darker tones where a coordinated, subtle look is needed.
Why The Verified Dimensions Improve Workflow
The stated 224 mm center to center distance allows fabricators and installers to standardize drilling patterns, saving setup time when repeating the same pull across a run of cabinets. Knowing projection is 1-1/2 inches helps position doors and drawers in relation to walls, appliances, or adjacent cabinetry by defining how far the hardware extends into walkways. Hand clearance of 1-1/16 inches behind the pull supports smoother operation, because users can wrap fingers around the grip without contact against the cabinet face. The 13/16 inch width and 15/16 inch base diameter give designers fixed visual proportions, easing decisions when pairing this pull with other components from the same space. Zinc construction offers a metal base that works well in typical residential cabinet environments, tying form and function into a single specified part number, 2407-1SLT-P.
Common Questions About This Berenson Cabinet Pull
What is the drilling distance for this Berenson Domestic Bliss pull?
The Berenson Domestic Bliss pull uses a 224 mm center to center measurement, so the two mounting holes are spaced 224 mm apart for consistent cabinet and drawer layouts.
How long is the Domestic Bliss Series cabinet pull overall?
The pull has a length or diameter listed at 9-3/4 inches, giving it a longer profile suited to wider cabinet doors and drawer fronts that benefit from a substantial handle span.
What material and finish does this 224 mm cabinet handle use?
This cabinet handle is made from zinc with a slate finish, combining a metal construction with a darker tone that works with transitional cabinet designs.
How far does the slate cabinet pull stand off the door?
The slate cabinet pull has a projection of 1-1/2 inches, setting how far it stands off the cabinet face and defining space for hands during daily operation.
What hand clearance does this zinc cabinet pull provide?
The zinc cabinet pull offers 1-1/16 inches of hand clearance, giving measurable room behind the grip for fingers when opening doors and drawers on fitted cabinetry.
Which screw size matches the 2407-1SLT-P Berenson pull?
The 2407-1SLT-P Berenson pull is specified with an 8-32 x 1 inch screw size, aligning it with common cabinet door and drawer thickness ranges in many woodworking projects.
Select This Pull For Verified Slate Style And Fit
The Berenson Domestic Bliss pull in slate gives projects a defined 224 mm center to center layout, an overall length of 9-3/4 inches, and a projection of 1-1/2 inches. These verified dimensions, paired with zinc construction and transitional styling, help align cabinet work with a specific, repeatable hardware choice. For cabinet runs, banks of drawers, or single feature pieces that call for this exact spacing and finish combination, this pull offers a clearly documented option ready to specify by part number 2407-1SLT-P.